Experimental investigations has been done to find out the heat transfer characteristics and friction factor of water based Al2O3 nanofluids as a coolant in  brazed plate heat exchanger. Plate heat exchanger either use horizontally or vertically. The base plate of the plate heat exchanger was kept inclined at (0⁰, 30⁰ ,60⁰, 90⁰). The experimentation have been done on the two different concentrat...

the objective of the present study is the synthesis of mwcnt-tio2 hybrid nanostructures by solvothermal synthesis method with ticl4 as precursor. the heat transfer enhancement due to the use of mwcnt-tio2 nanofluid was investigated. as-prepared hybrid materials were characterized by x-ray diffraction (xrd) and scanning electron microscopy (sem). the results showed that mwcnts were uniformly dec...

the purpos of this paper is to aim the maximum heat transfer rate in a plate-fin heat exchanger with a constant volume and a contant surface area at a prescribed pressure drop. this paper propose a method for design a plat-fin heat exchanger in which a maximum pressure drop occurs at a constant volume and surface are. in this paper as a case study, a preheater of a gas turbine which is a plate-...

This study presents an innovative and simple way to increase the rate of heat transfer in a spiral plate heat exchanger model. Several circular cross-section rods, as continuous vortex generators, have been inserted within the spiral plate heat exchanger in the cross-stream plane. The vortex generators are located at various azimuth angles of α=30◦, 60◦, 90◦, and 120◦ with non-dimensional diame...

Compact heat exchangers (CHE) are very well known for their special design which includes high heat transfer coefficient and maximum temperature driving force between the hot and cold fluids. The accurate prediction of the thermal performance of a compact heat exchanger in the design stage is highly desirable for most aerospace applications. In the present study, the numerical investigation for...

Heat exchangers: types .................................................................................................................................. 1 Plate heat exchangers ................................................................................................................................ 4 Shell-and-tube heat exchangers ............................................................

Heat exchangers: types .................................................................................................................................. 1 Plate heat exchangers ................................................................................................................................ 4 Shell-and-tube heat exchangers ............................................................

Enhancement of heat transfers in counterflow plate heat exchanger due to presence of an intermediate auxiliary fluid flow is investigated. The intermediate auxiliary channel is supported by transverse conducting pins. The momentum and energy equations for the primary fluids are solved numerically and validated against a derived approximate analytical solution. A parametric study including the e...

Recently, there have been many studies on dehumidifiers with a low flow rate of liquid desiccant, in which a plate-type heat exchanger with internal cooling is adopted. If the low flow rate of a liquid desiccant maintains a thin liquid film on the heat exchanger surface, heat and mass transfer performance would improve, the stability of the liquid film would increase, and there would be no entr...

For high end heat exchanging applications in cryogenics and space application, compactness and effectiveness are the key factors which determine the performance of heat exchanger. Matrix heat exchanger with perforated plate heat surfaces has both criterions to suit into these applications. High thermal conductivity plate and low thermal conductivity spacers are stacked together to obtain low lo...