the electrocatalysis of the oxygen reduction reaction (orr) on carbon supportedpt-v (1:1) catalyst in polymer electrolyte fuel cells (pefc) was investigated. atan oxygen pressure of one atm an enhanced electrocatalytic property of pt-v/ccompared with pt/c is revealed. these results indicate the occurrence of adifferent electrocatalytic mechanism for the orr on pt/c and pt-v/c. anincrease of mas...

the electrocatalysis of the oxygen reduction reaction (orr) on carbon supportedpt-v (1:1) catalyst in polymer electrolyte fuel cells (pefc) was investigated. atan oxygen pressure of one atm an enhanced electrocatalytic property of pt-v/ccompared with pt/c is revealed. these results indicate the occurrence of adifferent electrocatalytic mechanism for the orr on pt/c and pt-v/c. anincrease of mas...

We prepared a new V-Rh(111) alloy with (2×2) surface geometry. The alloy system and the adsorption of CO were investigated by the photoelectron spectroscopy of the valence and core states using synchrotron radiation, and by temperature-programmed thermal desorption spectroscopy (TPD). The obtained results indicate that the vanadium atoms in the prepared alloy were situated mainly in the subsurf...

We report on a two-dimensional (2D) V1–xPtxSe2 alloy that exhibits ferromagnetic order and Rashba spin–orbit coupling. Although ferromagnetism is absent in 1T-VSe2 because of the competition with charge density wave phase, we demonstrate theoretically experimentally substitution vanadium by platinum VSe2 (10–50%) to form homogeneous 2D restores down one monolayer V0.65Pt0.35Se2. Moreover, prese...

60) to be used for fabricating jewellery, so alloying additions are made to increase the hardness. Platinum jewellery alloys usually have platinum contents of 90 wt.% and higher. The most common alloys are hallmarked as 950 platinum (95 wt.%). Unlike carat gold (Au) jewellery alloys, where relatively large additions can be made (to alter the properties of the alloy such as its hardness or colou...

The alloy Mo-47Re has favorable mechanical properties at temperatures above 1400 C, but it undergoes severe oxidation when used in air with no protective coating. To shield the alloy from oxidation, platinum cladding has been evaluated. The unprotected alloy undergoes catastrophic oxidation under static and dynamic oxidation conditions. The platinum cladding provides good protection from static...

The electrocatalysis of the oxygen reduction reaction (ORR) on carbon supportedPt-V (1:1) catalyst in polymer electrolyte fuel cells (PEFC) was investigated. Atan oxygen pressure of one atm an enhanced electrocatalytic property of Pt-V/Ccompared with Pt/C is revealed. These results indicate the occurrence of adifferent electrocatalytic mechanism for the ORR on Pt/C and Pt-V/C. Anincrease of mas...

Titanium trialuminide coating on L10-type titanium aluminide alloys represents a valuable mean to improve oxidation resistance. Selection of L12-type titanium trialuminide alloys containing Mn as a coating material is particularly attractive because of its good ductility at room temperature and good oxidation resistance at high temperature of 1273 K. However, stability of the coated titanium tr...

this study describes a new simple, sensitive and selective catalytic kinetic spectrophotometricmethod for the determination of vanadium (v). the method is based upon the catalytic effect ofvanadium (v) on the oxidation of carminic acid by bromate in sulfuric acid media. the reaction wasfollowed spectrophotometrically by measuring the decrease in absorbance at 490 nm and thedependence of sensiti...

We report the observation of a magnetic moment on vanadium embedded in copper. Using x-ray-absorption spectroscopy and x-ray magnetic circular dichroism we show that the vanadium atomic magnetic moment is strongly dependent on the formation temperature of the VCu alloy. The absorption spectra allow us to distinguish the electronic transitions which are the signature of the magnetic state from t...