The electrochemical behavior of 6063 aluminum alloy in ethylene glycol-water mixture was investigated by polarization curves and AC impedance measurements (EIS).  The results obtained from polarization curves showed that corrosion rate decreased with increasing ethylene glycol concentration. EIS data showed the decrease in the interface capacitance which caused by adsorption of ethylene glycol ...

in this study, the four cr-mn-(ni-free) austenitic steels were fabricated by vacuum induction furnace. then plates with 10 mm thickness were fabricated by hot-rolling. corrosion behaviour of the four cr-mn steels in 0.1 m h2so4 solution was investigated using by open-circuit potential, potentiodynamic polarization, and electrochemical impedance spectroscopy (eis). the results indicated that the...

in this investigation, attempts were directed to study the inhibitive effects of nitrite and phosphate base inhibitors for the carbon steel alloy samples, which are used in an acid gas treatment process (the sulfiran® solution), in fe-edta solution. electrochemical techniques, i.e. polarization curves and electrochemical impedance spectroscopy (eis), were used to evaluate the inhibition efficie...

In this investigation, attempts were directed to study the inhibitive effects of nitrite and phosphate base inhibitors for the carbon steel alloy samples, which are used in an acid gas treatment process (The SULFIRAN® solution), in Fe-EDTA solution. Electrochemical techniques, i.e. polarization curves and electrochemical impedance spectroscopy (EIS), were used to evaluate the inhibition efficie...

This paper focused on the characterization of electrochemical behavior of a martensitic stainless steel in the acidic solutions. For this purpose, electrochemical parameters were derived from potentiodynamic polarization, Mott Schottky analysis and electrochemical impedance spectroscopy (EIS) techniques. The potentiodynamic polarization results showed that corrosion current density of AISI 420 ...

A low cross-polarization slot array antenna in the narrow wall of ridge waveguide is presented. A non-angled slot which is created in the narrow wall of the ridge waveguide is considered to be used as radiating resonant slot. The normalized resistance and normalized reactance curves are presented for design purposes. A six element slot array waveguide antenna with ridges on its narrow wall is t...

the effect of chloride ions concentration on the electrochemical behavior of aisi 410 stainless steel in thesimulated concrete pore (0.1 m naoh + 0.1 m koh) solution was investigated by various electrochemicalmethods such as potentiodynamic polarization, mott–schottky analysis and electrochemical impedancespectroscopy (eis). potentiodynamic polarization curves revealed that increasing chloride ...