practical applications of conducting polymers such as polyaniline as membranes are particulary limitedbecause of their poor mechanical properties. however by mixing polyaniline with some conventional insulatingpolymers such as nylon and preparation composite films through solvent casting or blending, it seems to be asuitable way in order to increase the mechanical properties of the conducting p...

The functional silica/polyamide-imide composite films were prepared via simple ultrasonic blending, after the silica nanoparticles were modified by cationic surfactant-cetyltrimethyl ammonium bromide (CTAB). The composite films were characterized by scanning electron microscope (SEM), thermo gravimetric analysis (TGA) and thermomechanical analysis (TMA). CTAB-modified silica nanoparticles were ...

Forward Osmosis (FO) polyamide thin-film composite membranes have been prepared by interfacial polymerization using commercial UF polyethersulfoneas membrane support. Different interfacial polymerization times (10s, 30s and 60s) in the organic solution containing trimesoyl chloride (TMC) at constant mphenylenediamine (MPD) concentration (2% w/v) were studied. The synthesized polyamide membranes...

The performance of commercial composite reverse osmosis membranes has been continuously improving, since its introduction in the late seventies. An additional significant improvement of membrane performance has been achieved at the beginning of 1995, when new composite polyamide brackish water RO membrane technology has been introduced. The new membrane material is characterized by a very high ...

A bone-implanted porous scaffold of mesoporous bioglass/polyamide composite (m-BPC) was fabricated, and its biological properties were investigated. The results indicate that the m-BPC scaffold contained open and interconnected macropores ranging 400-500 μm, and exhibited a porosity of 76%. The attachment ratio of MG-63 cells on m-BPC was higher than polyamide scaffolds at 4 hours, and the cell...

Changes in the transport parameters and the chemical nature of the surface of composite polyamide/polysulfone membranes due to both aging and treatment with chemical products (HCl, H(3)NO, and NaOH) have been considered. Hydraulic and salt permeability were obtained from water flow and salt diffusion measurements, respectively, and their values seem to indicate a modification in the structural ...

In this work, polyamide (PA)/silica nanocomposite films prepared by dissolution method of composite mixing were investigated. The morphology of nanocomposite films were characterized using scanning electron microscope (SEM), reveals that nano silica powder were uniformly dispersed on PA silica nanocomposite film. Chemical composition of film was confirmed by Fourier transform infrared spectrosc...

In this study, acicular nano-hydroxyapatite (n-HA) was used to make a new biomimetic composite with polyamide (poly hexamethylene adipamide) by a unique technique. The physical and chemical characteristics of the composites were tested. It was found that these synthesized n-HA crystals were similar to bone apatite in size, phase composition and crystal structure. The biomimetic n-HA crystals we...

Internal concentration polarization (ICP) in forward osmosis (FO) process is a characteristic problem for asymmetric thin-film composite (TFC) FO membrane which leads to lower water flux. To mitigate the ICP effect, modification of the substrates' properties has been one of the most effective methods. A new polyethersulfone-based ultrafiltration membrane with increased surface porosity and high...