the creep/recovery behavior of wood flour-polypropylene was compared with medium density fiberboard (mdf) and particleboard. for this purpose, wood flour-polypropylene composites (with and without compatibilizer)were manufactured by using a laboratory twin-screw extruder. the mdf and particleboard panels were obtained from local producers. short term flexural creep tests at 30% of ultimate bend...

The behavior of stone groundwood / polypropylene injection-molded composites was evaluated with and without coupling agent. Stone groundwood (SGW) is a fibrous material commonly prepared in a high yield process and mainly used for papermaking applications. In this work, the use of SGW fibers was explored as a reinforcing element of polypropylene (PP) composites. The surface charge density of th...

in this research, the decay resistance of bagasse-polypropylene composite has been evaluated. the scope of research was to assess the effect of different weight percentages of bagasse (40, 55 and 70%) and coupling agent, (mapp) maleic anhydride grafted polypropylene (0, 4 and 6%) on the fungal decay of the composite. astm d1413-99 modified test method was used to carry out the decay test, trame...

In this work, post-consumer polypropylene and wood flour from Pinus elliottii were used to produce wood plastic composites. The effect of polypropylene grafted with itaconic acid used as a coupling agent on mechanical properties, thermal stability and morphology of the composites was investigated and compared with the composite developed with polypropylene grafted with maleic anhydride, commonl...

Polypropylene is extensively used for varied applications due to its low cost, low density, high thermal stability and resistance to corrosion. Enhanced mechanical properties of Polypropylene can be achieved by mixing it with clays to form nanocomposites which increases its utility. Polypropylene Nano composites are formed by mixing polypropylene with calcium carbonate nano particles. This resu...

OBJECTIVES We herein report on development of a composite (synthetic and biological) tracheal scaffold with vascularized autologous connective tissue in the omentum, followed by in situ tissue engineering of the composite scaffold with the pedicled omentum. In this preliminary report, we focus on development and evaluation of the vascularized autologous connective tissue in the omentum. METHO...

the purpose of this study was to evaluate effects of nano-clay particles and oxidized polypropylene as compatibilizer on the decay resistance of wood plastic composite against coriolus versicolor fungi. in order to provide oxidized polypropylene as compatibilizer, polypropylene was oxidized in the presence of air oxygen in 2 hours by internal mixer. afterwards, wood fibers, polypropylene, nano-...

Melt spinning of polypropylene fibers containing silver and zinc nanoparticles was investigated. The nanometals were generally uniformly dispersed in polypropylene, but aggregation of these materials was observed on fiber surface and in fiber cross-sections. The mechanical properties of the resulted composite fibers with low concentration of nanometal were comparable to those for the control P...

The flexural properties of commercial bagasse-filled polyethylene (PE) and polypropylene (PP) composites were determined as a function of strain rate at room temperature. The applied strain rates were 1.5 ×10, 3.75×10, 7.5×10, and 1.5×10 s. The flexural modulus tended to increase linearly for the two types of composites with the logarithm of strain rate. The bending strength of polypropylene co...

The creation of highly oriented, co-extruded polypropylene (PP) tapes allows the production of recyclable ‘all-polypropylene’ composites, with a large temperature processing window (O30 8C) and a high volume fraction of highly oriented PP (O90%). These composites show little deviation of mechanical properties with compaction temperature. This paper introduces all-polypropylene composites and re...