Due to limited energy resources, high energy demand and constrict emission norms led the researchers to find alternative fuel for IC engines. Due to the fossil fuel crisis, the development of alternative fuel technologies has drawn more attraction to deliver the replacement of fossil fuel. Many alternative fuels have been developed and commercialized like alcohols, biodiesel, LPG, CNG etc. pyro...

A fixed bed pyrolysis has been designed and fabricated for obtaining liquid fuel from mustard de-oiled cake. Thermal pyrolysis of mustard deoiled cake were carried out in a semi batch reactor made up of stainless steel at temperature range from 450 0 C to 600 0 C and at a rate of 150C /min to produce bio-fuel. The maximum yield of oil was 51% on wt. % basis for mustard de-oiled cake, it was obt...

Pyrolitic conversion of lignocellulosic biomass, such as switchgrass and other agricultural residues, to bio-fuels is being considered for national energy security and for environmental advantages. Bio-oil, syngas and bio-char were produced and characterized from switchgrass at 400, 500 and 600 0C by pyrolysis. Bio-oil yield increased from 22 to 37%, syn-gas yield increased from 8 to 26%, and b...

The co-pyrolysis of waste electrical and electronic equipments (WEEEs) and waste biomass to obtain pyrolysis-oil, a liquid fuel or chemical feedstock, was carried out in the present work. The pyrolysis-oil yield of co-pyrolysis reached 62.3% which was significantly higher than those of pyrolysis of WEEEs and biomass alone (i.e., 53.1% for WEEEs and 46.3% for biomass), suggesting that synergisti...

Approximately 1.5 billion tyres are produced each year which will eventually enter the waste stream representing a major potential waste and environmental problem. However, there is growing interest in pyrolysis as a technology to treat tyres to produce valuable oil, char and gas products. The most common reactors used are fixed-bed (batch), screw kiln, rotary kiln, vacuum and fluidised-bed. Th...

Upgrading of cracked PFO (Pyrolysis fuel oil) for production of fuels, such as gasoline and light gasoil, was carried out in a semi batch reactor. Two different kinds of mesoporous and microporous catalysts, MCM-41 and ZSM-5, were used. Modification methods, such as ion exchange and impregnation with Fe and Ti, were done for tuning the acidity of the catalyst. XRD, FT-IR, and XRF analyzes were ...

In order to clamp down on the illegal use of fishing boat fuel A (FBFA) and to reduce exhaust emissions in Taiwan, the residue from a desulfurization unit (RDS) and pyrolysis fuel oil (PFO) were added into FBFA with the ratio of 0.5% to form two new blended fuels (RDS0.5 and PFO0.5). The appearances of fuels from dark to light are RDS0.5, PFO0.5, and FBFA. The two new fuels have higher viscosit...

The main objective of the research is to compare the accurateness of Artificial Neural Networks (ANN) and Multiple Linear Regressions (MLR) model for Specific Fuel Consumption for pyrolysis oil blended with diesel used in a single cylinder diesel engine. In this study, parameters i. e. Injection Timing, Injection Pressure, Compression Ratio, and Load are taken. Artificial Neural Networks (ANN) ...

The worldwide concern regarding global warming has increased the interest of using biomass as a renewable and CO2 neutral source of energy. Pyrolysis oil (PO), as one of the most important product of biomass conversion, has the potential to be used as a fuel oil substitute in many applications for heat and electricity generation. However, pyrolysis oil properties and its behavior during combust...

With the rapid development of global economy, there is an ever-growing demand for energy. The excessive use of traditional fossil fuel exposes the human to multiple environmental issues. As a promising technology, thermochemical conversion of biomass is able to provide not only environmental-friendly substitute fuel, but also other value-added chemicals. However, the complex composition and poo...