This paper examines the ability to measure the velocity of both physiological saline (PS) and in vitro blood in a rectangular polydimethysiloxane (PDMS) microchannel by means of the confocal micro-PIV system. The PDMS microchannel, was fabricated by conventional soft lithography, had a microchannel near to a perfect rectangular shape (300μm wide, 45μm deep) and was optically transparent, which ...

In this work, slip flow of helium gas has been studied in a three dimensional rectangular microchannel heat sink with 11 microchannel and 10 rectangular fins. Helium gas flow is considered ideal and incompressible. The finite volume method with using coupled algorithm is employed to carry out the computation. To validate the present work, comparison with numerical and experimental studies is do...

The present study experimentally investigated a new hybrid cooling scheme by combination of a microchannel heat sink with a micro-synthetic jet actuator. The heat sink consisted of a single rectangular microchannel measured 550 μm wide, 500 μm deep and 26 mm long. The synthetic jet actuator with a 100 μm diameter orifice was placed right above the microchannel and 5 mm downstream from the chann...

We report a contraction-expansion array (CEA) microchannel that allows three-dimensional hydrodynamic focusing with a single sheath flow in a single-layer device. The CEA microchannel exploits centrifugal forces acting on fluids travelling along the contraction and expansion regions of the microchannel. Around an entrance of the contraction region, the centrifugal forces induce a secondary flow...

Introduction MicroChannel Fabrication Experimental Apparatus and Methodology Results and Discussion Summary and Conclusions CHAPTER 4 MICROPIV MEASUREMENT OF TURBULENT FLOW IN RECTANGULAR MICROCHANNELS WITH VARYING AS­ PECT RATIOS Abstract Introduction MicroChannel Fabrication Experimental Methodology Experimental Setup Measurement Error Results and Discussion Summary and Conclusions CHAPTER 5 ...

Vapor-venting microchannel heat exchangers are promising because they address the problems of high pressure drop, flow instability, and local dryout that are common in conventional two-phase microchannel heat sinks. We present a 3D numerical simulation of the vapor-venting process in a rectangular microchannel bounded on one side by a hydrophobic porous membrane for phase-separation. The simula...

In this paper, a systematic study of a fully developed electroosmotic flow of power-law fluids in a rectangular microchannel bounded by walls with different zeta potentials is described. Because the upper and lower layers of most microchannels are made of different materials, it is necessary to study the flow characteristics for cases in which the microchannels have different zeta potentials at...

We present a novel electroosmotic micromixer that consists of arrays of direct current (DC) asymmetric electrode and asymmetric lateral structures. By embedding asymmetric electrode arrays on the top and bottom walls of a rectangular microchannel appropriately, the flow perturbations and vortexes can be induced when a DC electric field is imposed. An efficient lateral structure is then sequenti...

Convective heat transfer of MgO-water nanofluid in a microchannel heat sink is experimentally investigated in various concentrations of 0.01, 0.05, 0.1, and 0.6 wt%. The microchannel consisted of 48 parallel rectangular cross section channels with the height of 800 µm, width of 524 µm and length of 52 mm. A well stability duration (ca. 1 month) was resulted by a 180 min ultra-sonication of the ...