Reduced web section beams in shear-yielding moment-resistant steel frames are used for energy dissipating of earthquakes. The finite element analysis indicates that failure mode of these beams are governed by the combination of shear force and flexural moment. Therefore the analysis of frames with reduced web section beams needs consideration of shear-flexural interaction in those sections. In ...

Beam connections with reduced drilled section and slotted web have been presented after the Northridge earthquake (1994). Their new geometrical shapes have been resulted in weakening of beams and subsequently the bette rperformance of connections in the earthquakes. In this research, the advantages of both connections, mentioned above, have been studied in the Slotted Web Drilled Flange (SWDF) ...

the basic strategy of reduce the ductility demand and related concentrated tensions at moment resistance connections is reduce the section of the beam at connected region to column. by this method plastic hinge done at the reduced cross section and this local reduction decreases the demand of the components of connection. on this basis, in present study a new beam-to-column moment connection wi...

This paper evaluates the effect of slot existence with limited length between flanges and web junction of I-shaped beams at the region of moment connections on vertical force and shear stress distribution in beam flanges and web at connection section in comparison with classical theory of stress distribution. The main purpose of this research is to evaluate the efficiency of the slot in connect...

in this paper a new method based on strut-and-tie model (stm) is proposed to determine the shear capacity of simply supported rc deep beams and an efficiency factor for concrete with considering the effect of web reinforcements. it is assumed that, the total carried shear force by rc deep beam provided by two independent resistance, namely diagonal concrete strut due to strut-and-tie mechanism ...

in this paper, collapse behavior of simple and reinforced thin-walled channel- section beams, subjected to three- point bending, is investigated. many simple channel- section beams of different geometry and some reinforced ones were tested, and their strengths after collapse were obtained thoroughly. since the available theories in this area are complicated and little attention has been paid to...