This work presents a controllability analysis of a low temperature ethanol reformer based on a cobalt catalyst for fuel cell application. The study is based on a nonlinear dynamic model of a reformer which operates in three separate stages: ethanol dehydrogenation to acetaldehyde and hydrogen, acetaldehyde steam reforming, and water gas shift reaction. The controllability analysis is focused on...

In this study, a reformer model simulation to use refinery (Farashband refinery, Iran) waste natural gas. In the petroleum and allied sectors where natural gas is being encountered (in form of associated gas) without prior preparation for its positive use, its combustion (which takes place in flares, an equipment through which they are being disposed) has become a great problem because of its a...

Our goal in this paper is the description and analysis of new findings and results on membrane reactors and catalytic reactors/heterogeneous processors for the steam reforming reactions of methane, natural gas, and methanol for use in power generation systems and fuel cells. The current communication continues this research by giving emphasis in the so-called “Improved Reaction” and “ReformingF...

Micro reformers still face obstacles in minimizing their size, decreasing the concentration of CO, conversion efficiency and the feasibility of integrated fabrication with fuel cells. By using a micro temperature sensor fabricated on a stainless steel-based micro reformer, this work attempts to measure the inner temperature and increase the conversion efficiency. Micro temperature sensors on a ...

A rigorous two-dimensional model is developed for simulating the operation of a less-investigated type steam reformer having a considerably lower operating Reynolds number, higher tube diameter, and non-availability of extra steam in the feed compared with conventional steam reformers. Simulation results show that reasonable predictions can only be achieved when certain correlations for wall to...

Vegetable oils and ethanol have been used in a plasmatron reformer to generate synthesis gas. Corn, canola, and soybean oils and ethanol have been reformed at different oxygen to carbon ratios and different power levels. Both homogeneous plasma reforming (uncatalyzed) and catalytic plasma reformer have been evaluated.

In this work, an experimental study of biomass gasification in different operation conditions has been carried out in an updraft gasifier combined with a porous ceramic reformer. The effects of gasifier temperature, steam to biomass ratio (S/B), and reforming temperature on the gas characteristic parameters were investigated with and without porous ceramic filled in reformer. The results indica...

The tubes in an Ammonia primary reformer furnace operate close to the limits of materials technology in terms of the stress induced as a result of very high temperatures, combined with large differential pressures across the tube wall. Operation at tube wall temperatures significantly above design can result in a rapid increase in the number of tube failures, since tube life is very sensitive t...

A compact reformer to generate hydrogen for portable fuel cell applications is presented. This reformer is a conventional type single-path tubular reactor packed with granular catalyst particles in which steam reforming and catalytic partial oxidation reactions take place in series using a mixture of methanol and water as a feed. The novel feature of this reformer is in the interlacing of the f...

Integration of a reformer and a proton exchange membrane fuel cell (PEMFC) is problematic due to the presence in the gas from the reforming process of a slight amount of carbon monoxide. Carbon monoxide poisons the catalyst of the proton exchange membrane fuel cell subsequently degrading the fuel cell performance, and necessitating the sublimation of the reaction gas before supplying to fuel ce...