Additives were tested for their ability to modify the rheology of lignocellulosic biomass. Additive types included water-soluble polymers (WSPs), surfactants, and fine particles. WSPs were the most effective rheological modifiers, reducing yield stresses of concentrated biomass by 60–80% for additive concentrations of 1–2 wt. % (based on mass of dry biomass solids). Yield stress and plastic vis...

The main objective of this study is to evaluate the workability of fresh portland cement concrete while it is still in the mixing truck by determining fundamental rheological parameters (plastic viscosity and yield stress). Nine concrete mixtures with different values of yield stress and plastic viscosity were tested in a concrete truck. The measurements made with the truck were based on the ty...

   Drilling fluids are an essential component of the rotary drilling process used to drill for oil and gas on land and offshore environments. The injection of this nano particle into drilling fluid increases the viscosity levels fluids. In these experiments, the rheological properties of the fluid including apparent viscosity (AV), plastic viscosity (PV), yielding point (YP), mud c...

A thin-shell program for modeling neotectonics of regional or global lithosphere with faults. Influence of fore-arc structure on the extent of great subduction zone earthquakes. 1994: Effects of multiple phase transitions in a three-dimensional spherical model of convection in Earth's mantle. 2000: Role of temperaturedependent viscosity and surface plates in spherical shell models of mantle con...

In this study, oil palm empty fruit bunch fibres (EFB) reinforced polypropylene (PP) composites were prepared by two different methods i.e. physical treatment of the composites using electron beam irradiation and chemical treatment by adding coupling agent such as maleated PP. The composites pellets were then subjected to injection moulding for preparation of test pieces for physical, mechanica...

In this study, predictive capabilities of apparent viscosity of oil-based drilling fluids which is used in National Iranian South Oilfields Company (NISOC) were evaluated using Newtonian and non-Newtonian models to drive a new suitable equation. The non-Newtonian models include Bingham plastic, Power law, Herschel-Bulkley, Casson, and Robertson-Stiff. To validate the results, the calculated vis...

Abstract Rheological properties of concrete are considered to be the most ideal method characterize working performance concrete. models used quantitatively based on yield stress and viscosity fresh cement paste. In this paper, Rheology QC was study influence different main link densities (acid-ether ratios) rheological The Bingham model fit curve slurry, stress, plastic viscosity, thixotropic ...

In this study, synthetic sulfonated polymers were used in order to enhance the rheological properties of drilling fluids. The capability of these polymers in reducing the effects of environmentally friendly, but harmful, pollutants such as cement, calcium chloride, gypsum as well as pH changes were investigated. In the present work, two sulfonated synthetic polymers, namely Polythin and Polydri...

the effects of some synthetic sweeteners on the rheological and physical properties of guar gum in dilute solutions were investigated.measurements include the determination of intrinsic viscosity and the particle size, surface weighted mean [d3, 2], volume weighted mean [d4,3] and specificsurface area ofguar gum andsyntheticsweeteners mixtures. the concentration of these sweeteners were 0, 0.1,...