In Thailand, RSS chamber of community-level rubber cooperatives can be classified into two models: old and new model, named after the years of their establishment. Hot gas as a heat supply from Para-rubber (PR) wood (Hevea brasiliensis) combustion is used for removing moisture from the natural rubber (NR) sheets. Smoke and soot particles from PR wood burning has effected to the quality of the N...

In Thailand, RSS chamber of community-level rubber cooperatives can be classified into two models: old and new model, named after the years of their establishment. Hot gas as a heat supply from Para-rubber (PR) wood (Hevea brasiliensis) combustion is used for removing moisture from the natural rubber (NR) sheets. Smoke and soot particles from PR wood burning has effected to the quality of the N...

Rubber wood (Ficus elastica) is one the biomass waste that can be used as raw material for a gasification process and has a calorific value of 4,069 cal/gram. Gasification is a process to convert a solid fuel to syngas (CO, CH4, and H2) through a combustion process using limited air between 20% to 40% of air stoichiometry. Depending on the direction of airflow, the gasifiers are classified as u...

The obtaining and characterization of some polymeric eco-composites based on wood sawdust and natural rubber is presented. The natural rubber was cross-linked using the electron beam irradiation. The irradiation doses were of 75, 150, 300 and 600 kGy and the concentrations of wood sawdust were of 10 and 20 phr, respectively. As a result of wood sawdust adding, the physical and mechanical proper...

Differing from the hot-pressing method in the manufacturing of traditional wood-rubber composites (WRCs), this study was aimed at fabricating WRCs using rubber processing to improve water resistance and mechanical properties. Three steps were used to make WRCs, namely, fiber-rubber mixing, tabletting, and the vulcanization molding process. Ninety-six WRC panels were made with wood fiber content...

Rubber wood (Hevea brasiliensis) was esterfied with phenylisothiocyanate, and dimensional stability, decay resistance, and photo stability of the modified wood was assessed. The chemically modified wood was characterized by FTIR and CP/MAS C NMR spectroscopy. Unmodified and modified samples were exposed to a brown rot (Polyporus meliae) and a white rot (Coriolus versicolor) fungus for 12 weeks....

OBJECTIVE We utilized job safety analysis (JSA) and hazard identification for work accident prevention in Para rubber wood sawmills, which aimed to investigate occupational health risk exposures and assess the health hazards at sawmills in the Trang Province, located in southern Thailand. METHODS We conducted a cross-sectional study which included a walk-through survey, JSA, occupational risk...

Displacement fields for tensile loaded rubber and wood in paralleland perpendicularto-grain were obtained from digital image correlation. The results showed that the digital image correlation can reveal fine details of the nature of displacements in both rubber and wood. It was found that when load is perpendicular-to-grain, the lignin matrix produces uniform displacement fields similar to that...

Chemical modification of wood with isopropenyl acetate (IPA) using iodine (I2) as catalyst has been carried out. Rubber wood (Hevea brasiliensis) specimens were reacted with IPA using iodine (I2) catalyst at 95°C up to 10 h under solvent free conditions. The effect of catalyst concentration and reaction time was studied. The extent of acetylation was measured by determining weight percent gain ...