In this paper the effect of a novel bifunctional additive [cyclic butylene terephthalate (CBT)] was investigated on the rheological, curing and mechanical properties of natural rubber (NR), styrene butadiene rubber (SBR), oil extended styrene butadiene rubber (oSBR), acrylonitrile butadiene rubber (NBR) and ethylene propylene diene rubber (EPDM). Results showed, that CBT acted as an effective l...

In this paper, graphene oxide/styrene-butadiene rubber (GO/SBR) composites with complete exfoliation of GO sheets were prepared by aqueous-phase mixing of GO colloid with SBR latex and a small loading of butadiene-styrene-vinyl-pyridine rubber (VPR) latex, followed by their co-coagulation. During co-coagulation, VPR not only plays a key role in the prevention of aggregation of GO sheets but als...

nanocomposite vulcunizates based on styrene-butadiene rubber (sbr), organoclay and a conventional sulfur curing system were prepared by melt blending process in an internal mixer. in order to study the effects of the type of interfacial compatibilizer on the properties of sbr and clay nanoparticles,three types of compatibilizers, maleic anhydride grafted ethylene-propylene diene rubber (epdm-g-...

To improve the performance of concrete, polymers are mixed with concrete. It has been observed that polymer-modified concrete (PMC) is more durable than conventional concrete due to superior strength and high durability. In this research, effect of Styrene-Butadiene Rubber (SBR) latex on compressive strength and flexural strength of concrete has been studied and also the optimum polymer (SBR-La...

Abstract—In order to use bitumen in hot mix asphalt, it must have specific characteristics. There are some methods to reach these properties. Using polymer modifiers are one of the methods to modify the bitumen properties. In this paper the effect of StyreneButadiene-Rubber that is one of the bitumen polymer modifiers on rheology properties of bitumen is studied. In this regard, the rheological...

Positive carcinogenicity studies in mice and rats have led to concerns that 1,3-butadiene may be carcinogenic in humans under exposure conditions that have existed in occupational settings and perhaps exist today. The principal settings of interest are the styrene-butadiene rubber (SBR) manufacturing industry, which uses large quantities of 1,3-butadiene, and the 1,3-butadiene monomer industry....

This brief article aims to reveal the flexural performance, including the equivalent flexural strength of PVA (Polyvinyl Alcohol) modified concrete by comparing it primarily with that of SBR (Styrene Butadiene Rubber) concrete. This data article is directly related to Karadelis and Lin [6].

Kompleks ortamlarda asphalt kaplamaların performansını garanti etmek için styrene- butadiene- styrene (SBS), butadiene rubber (SBR), crumb (CR), and polyphosphoric acid (PPA) gibi bazı malzemeler bitüm modifikasyonunda kullanılmıştır. Modifikasyon yöntemleri sırasında, geleneksel asfalt bağlayıcıyı geliştirmek veya desteklemek alternatif katkılar Modifiye üretilmesinde en çok kullanılan polimer...

The variation of the monomeric friction coefficient of styrene butadiene copolymer (SBR) and natural rubber (NR) with various degrees of cure was analyzed. Samples with different levels of cure were prepared. Loss tangent measurements of the samples were performed by means of a damped torsion pendulum between 173 K and 373 K. Data were analyzed in the frame of the Kloczkowsky, Mark and Frisch m...