نتایج جستجو برای: SOFC interconnect
تعداد نتایج: 13435 فیلتر نتایج به سال:
The mechanical failure of solid oxide fuel cell (SOFC) components may cause cracks with consequences such as gas leakage, structure instability and reduction of cell lifetime. A comprehensive 3D model of the thermal stresses of an anode-supported planar SOFC is presented in this work. The main objective of this paper is to get an interconnect optimized design by evaluating the thermal stresses ...
One factor limiting solid oxide fuel cell (SOFC) performance is the degradation of chromium containing, ferritic stainless steel, interconnects during operation. When chromium-containing steels are used as interconnect materials a chromium oxide layer forms on the surface. Under SOFC operating conditions (Cathode gas 800oC and 2.5-3.1% H2O) chromium ions are vaporized by the cathode gas and red...
Solid oxide fuel cells are high temperature electrochemical devices for direct conversion of fuel and oxidant to electricity and heat. The high temperature and dual atmosphere creates challenges for the materials in solid oxide fuel cell stacks. In this thesis SOFC stack materials were studied and developed. SOFC stacks are assembled at room temperature, then heated up, conditioned and operated...
Cathode poisoning by chromium evaporation from the interconnects is one of major degradation mechanisms in SOFC. Coatings have proved to be very effective suppressing on interconnects. The quantification important for determining consumption interconnect and predicting lifetime interconnect. Chromium uncoated Ce/Co coated Crofer 22 APU reevaluated at 800°C. coatings steel sheets precut steels s...
In this study, a solid oxide fuel cell (SOFC) stack has been successfully fabricated and tested by using direct natural gas. The main objective of this research was to achieve optimal long-term performance of the SOFC stack without carbon deposition by using low-cost natural gas as a fuel. The stack configuration was improved by a new interconnect design and made of cost-effective raw materials...
Two glass-ceramics sealants for solid-oxide fuel cells (SOFC) in the system BaO/SrO-MgO-B2O3-SiO2 have been analysed according to relevant sealing parameters such as sintering and crystallization of glass powders dilatation viscosity evolution with glass-ceramic compacts. Special emphasis is given kinetics mechanism, crystalline phases formed role whole process. The slower rate strontium-contai...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید