نتایج جستجو برای: SiC-TiC

تعداد نتایج: 21959  

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه صنعتی اصفهان - دانشکده مهندسی مواد 1385

در این پژوهش سعی شده است برای اولین بار از روش سنتز احتراقی برای تولید واشرهای مصرفی در آب بندهای مکانیکی استفاده گردد. از این رو امکان پذیری تولید ترکیبات tib/ti, sic-tib2,ti3sic2, tic-nial , tic-sic/,tib2 به روش سنتز احتراقی مورد بررسی قرار گرفتند سپس با استفاده از sem و آنالیز eds و تفرق اشعه x فازهای تشکیل دهنده شناسایی شدند. با توجه به اینکه اکثر آب بندهای مکانیکی از جنس sic می باشد سعی شد...

2007
Per Eklund Lars Hultman

In this Thesis, I have investigated multifunctional nanostructured Ti-Si-C thin films synthesized by magnetron sputtering in the substrate-temperature range from room temperature to 900 °C. The studies cover high-temperature growth of Ti3SiC2 and Ti4SiC3, low-temperature growth of Ti-Si-C nanocomposites, and Ti-Si-C-based multilayers, as well as their electrical, mechanical, and thermal-stabili...

2016
T. Sato A. Shiratori M. Shimada M. SHIMADA

Strength and toughness of A l 2 O 3 based ceramics were improved by d i spers ing ZrO,(Y,O,) and nonoxide mate r ia l s such a s Sic , Tic, TiN and B&. S ign i f ican t toughening and hardening were a t t a i n e d i n A1203-Zr0,-Sic and Al,O,-Zr0,-Tic composites.

In this research, the SiC-matrix composite with different amounts of TiC (0, 2.5, 5, 7.5, and 10 wt%) supplemented with additives including 4.3 wt% Al2O3 and 5.7 wt% Y2O3 were utilized to initiate the required liquid phase. The sintering process was performed using pressureless sintering at      1900 °C for 1.5 hours under argon atmosphere. The compos...

سرپولکی, حسین, فضلی, محمد,

درسال­های اخیر، نانوکامپوزیت SiC-TiC با توجه به خواص مکانیکی و الکتریکی بسیار خوب در دمای بالا، بسیار مورد توجه قرار گرفته است. در تحقیق حاضر نانو پودر کامپوزیتی SiC-TiC به روش سل ژل و با استفاده از تیتانیوم ایزوپروپوکساید، تترا اتیل اورتوسیلیکات، ساکاروز و اسید نیتریک سنتز شد. مواد اولیه توزین و در  60 مخلوط شدند که پس از 5 ساعت، گرانروی محلول بتدریج افزایش یافته و در نهایت به ژل تبدیل شد. ژل ...

2017
S. Motojima I. Hasegawa H. Iwanaga

Micro-coiled fibers of carbon, Sic, Si N Tic, ZrC and Hf C were prepared by a metal-impurity activa?e%'chemical vapor deposition or vapour phase metallizing of the coiled carbon fibers. The growth conditions, morphology, growth mechanism and some properties were examined. The double-coiled carbon fibers were prepared using acetylene as a carbon source and various powders or plates of transition...

Journal: :Materials today communications 2021

TiB2-SiC-C and TiB2-TiC-C heteromodulus ceramics were sintered by reactive hot pressing of TiC-B4C-Si TiC-B4C precursors at 1830 °C 30 MPa. Sintering time the maximum temperature was between 2 8 min. The reactions in green body create submicron (100–400 nm) TiB2 crystals inside silicon carbide grains as well BxSiyCz nanofibers, which nucleate near SiC surfaces. Low hardness graphite platelets a...

Journal: :Journal of the Ceramic Society of Japan 2004

2014
Tao Peng Zongkui Kou Hui Wu Shichun Mu

The synthesis of graphene via decomposition of SiC has opened a promising route for large-scale production of graphene. However, extremely high requirements for almost perfectly ordered crystal SiC and harsh process conditions such as high temperatures (>1200 °C) and ultra-high vacuum are two significant challenges hindering its wide use to synthesize graphene by decomposition of SiC. Here, we ...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید