نتایج جستجو برای: Sintering temperature

تعداد نتایج: 461287  

2010
Asami Kikuchi Lihua Zhang Noriyuki Okinaka Tsuyoshi Tosho Tomohiro Akiyama

This paper describes thermoelectric properties of La-doped SrTiO3 prepared by using a combination of combustion synthesis (CS) with post spark plasma sintering (SPS), on which effects of sintering temperature were mainly examined. In experimental, combustion-synthesized (CSed) samples (Sr1 xLaxTiO3, x 1⁄4 0:08) were spark-plasma-sintered (SPSed) at temperatures from 1513 to 1663K and the thermo...

Journal: :international journal of nanoscience and nanotechnology 2013
h. tamaddon* a. maghsoudipour

the fuel cells are distinguished as generating of green allocable energy and are electrochemical devices of low environmental impact. porous nanocrystalline strontium-doped lanthanum manganite la0.8sr0.2mno3 (lsm) cathode materials were prepared by mechanochemical route in various grinding times. carbon black was employed to produce pores. the formation of lsm single phase was studied by x-ray ...

2010
Waleed Asim Hanna Payman Suhbat Ahmed

This work focuses on studying the role of drying and calcination on stiochiometry and crystallinity of deposited HA. Also, studying the effect of sintering temperature on phases generated, physical and mechanical properties of sintered HA powder compact at a range of (800-1200) ̊ C. Both Ca/P ratio and crystallinity were increased after calcination, where the Ca/P ratio raised from 1.7 to 1.9 an...

2008
C. Padmavathi D. Agarwal A. Upadhyaya

Until 2000 almost all research in the microwave sintering area was confined to non-metallic materials. However, after the first report by Penn State in 1999 on full sintering of steel powders in microwave, now in the last few years there has been increasing interest in applying microwave energy for processing of variety of metallic materials. The present study is an extension of this work and r...

2012
Seung-Hwan Lee Sung-Gap Lee Young-Hie Lee

Lead-free 0.98(Na0.5K0.5)NbO3-0.02Ba(Zr0.52Ti0.48)O3 [0.98NKN-0.02BZT] ceramics were fabricated by the conventional mixed oxide method with sintering temperature at 1,080°C to 1,120°C. The results indicate that the sintering temperature obviously influences the structural and electrical properties of the sample. For the 0.98NKN-0.02BZT ceramics sintered at 1,080°C to 1,120°C, the bulk density i...

2013
Robiul Islam Md Obaidur Rahman M. Abdul Hakim Dilip Kumar Saha Md Al-Mamun

The effect of frequency and sintering temperature on initial permeability of Ni0.55Zn0.45Fe2O4 ferrites have been studied by using an impedance analyzer. The samples were prepared by conventional double sintering ceramic technique using oxide nanoparticles of grain size 30 50 nm. Single phase spinal structure has been confirmed for the prepared samples by X-ray diffraction. As the sintering tem...

2016
Long Zhang Xiaomin Zhang Zhongxiang Chu Song Peng Zimin Yan Yuan Liang

Thermal effects are important considerations at the initial stage in spark plasma sintering of non-conductive Al2O3 powders. The generalized thermo-elastic theory is introduced to describe the influence of the heat transport and thermal focusing caused by thermal wave propagation within a constrained space and transient time. Simulations show that low sintering temperature can realize high loca...

2011
Ali Asadi Ali Sadough Vanini Amin Jabbari

In this study, the procedure of sintering and heat treatment of Al2O3-SiC-MgO nanoceramic was considered. For improving the densification behavior and mechanical properties, experimental variables, such as sintering temperature and duration, which significantly influence the fracture performance of this nanocomposite body, were optimized. To obtain desired properties, several tests were conduct...

2009
X. H. Zheng

Yttrium silicate coating[5, 6] is a promising candidate for oxidation resistant coating for its low oxygen diffusion coefficient and similar thermal expansion coefficient with silicon carbide. Webster et. al.[7] had prepared yttrium silicate coating on C/SiC using Y2O3/SiO2 slips by slip casting and sintering. The selected sintering parameters were 3 h at 1600 °C in flowing argon. The coating c...

2007
Edward C. Kinzel Hjalti H. Sigmarsson Xianfan Xu William J. Chappell

This paper investigates fabrication of functional thick metal films using simultaneous laser sintering and patterning along with the fundamental physical phenomena that govern the laser sintering process. The effects of the processing parameters on the quality of the fabricated components are investigated through a heat transfer analysis. We show that our process has potentials for metallizatio...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید