In this work, the compound flow control method (passive and active) has been described. EHD actuators as wire-plate (active) and splitter plate (passive) were coupled and applied to control fluid flow and heat transfer around cylinder in cross flow. Investigation consists of the interaction between electric field, fluid flow and temperature field. Experimental tests included various positions o...

A square splittered and unsplittered rod is placed in a turbulent boundary layer developed over a flat plate. The effect of the resulting disturbances on the local heat transfer coefficient is then studied. In both cases the square rod modifies the flow structure inside the boundary layer. As a result, a stagnation point, a jet and wake area are generated around the square rod, each making a co...

In the current paper, the effect of length and angle of a splitter plate on hydro-thermal field in a range of Reynolds number from 40 to 1000 are numerically studied by solving the two-dimensional Navier-Stokes equations. For discretization of governing equations, PISO algorithm was imposed to segregate the pressure-velocity coupled equations, and second-order upwind discretization scheme was a...

Submarine pipelines are appropriate method for transmission of oil and gas from sea bed. Free spans may occur due to the natural uneven seabed or by under-scouring. Vortex Induced Vibration (VIV) can happen in such free spans at high Reynolds number. Resonance occurs if the frequency of vortex shedding is close to the pipeline’s natural frequency leading to its fatigue that can break the pipeli...

Direct numerical simulationhas been carried out for turbulent  owovera rectangular trailing edge at aReynolds number of 1 £ £ 103 (based on the freestream quantities and the trailing-edge thickness) and ratio of boundarylayer displacement thickness to trailing-edge thickness close to unity. Two types of  ow control were studied: base transpiration and secondary splitter plate. Simulation of b...

SUMMARY The linear spatial stability of a mixing layer between two parallel streams is considered, and a comparison is made between the stability of flows with and without a stationary splitter plate separating them upstream. The assumed velocity profile satisfies the condition of no slip on the splitter plate, but in other respects the flow is treated as inviscid. Account is taken of the jet s...

This paper briefly reviews bluff body aerodynamics and focuses mainly on the use of short and thin splitter plates to interfere with the vortex wakes and suppress vortex-induced forces (VIF). The present investigation primarily examines the suppression of unsteady, two-dimensional wake instabilities over a low Reynolds number range of less than 250. A circular cylinder is used as the bluff body...

The influence of metal vapour on the arc behaviour during the arc-splitting process in the quenching chamber of a low-voltage circuit breaker is investigated numerically. A three-dimensional magnetohydrodynamic model of air arc plasma, taking into account the production of metal vapour from erosion of an iron splitter plate, is developed. An equation describing conservation of the iron vapour m...

Since its founding, NASA has been dedicated to the advancement of aeronautics and space science. The NASA Scientific and Technical Information (STI) Program Office plays a key part in helping NASA maintain this important role. The NASA STI Program Office is operated by Langley Research Center, the lead center for NASAÕs scientific and technical information. The NASA STI Program Office provides ...

In order to understand the recovery characteristics of AC contactors and improve their performance, experimental measurements were used to investigate the arcing gap recovery process including dielectric recovery strength and reignition, to a pair of splitter plate together and four kinds of arc chamber of AC contactors. A special circuit was designed to perform the work. It demonstrates that u...