BACKGROUND CONTEXT Surgeons are hesitant to mix components made of differing metal classes for fear of galvanic corrosion complications. However, in vitro studies have failed to show a significant potential for galvanic corrosion between titanium and stainless steel, the two primary metallic alloys used for spinal implants. Galvanic corrosion resulting from metal mixing has not been described i...

A modified version of the carburization process, a widely established technique used in the steel industry for case hardening of components, is used for the growth of graphene on stainless steel. Controlled growth of high-quality single- and few-layered graphene on stainless steel (SS) foils through a liquid-phase chemical vapor deposition (CVD) technique is reported. Reversible Li intercalatio...

The influence of the concentration of1-H-benzoteriazolon the corrosion of 316 stainless steel (SS) in chloride acid 1M solutions was studied. The potentiodynamics polarization and scanning electron microscopy (SEM) have been used. The inhibition efficiency increased with an increase in the concentration of1-H-benzoteriazol.The adsorption of1-H-benzoteriazol onto the SS surface occurs accord...

Orthodontic stainless-steel appliances are considered to be corrosion resistant, but localized corrosion can occur in the oral cavity. This study was undertaken to evaluate the properties of super stainless steels in orthodontic applications. Accordingly, the metallurgical properties, mechanical properties, corrosion resistance, amount of the released nickel, cytotoxicity, and characteristics o...

To evaluate the clinical potential of high nitrogen nickel-free austenitic stainless steel (HNNF SS), we have compared the cellular and molecular responses of human umbilical artery smooth muscle cells (HUASMCs) to HNNF SS and 316L SS (nickel-containing austenitic 316L stainless steel). CCK-8 analysis and flow cytometric analysis were used to assess the cellular responses (proliferation, apopto...

BACKGROUND The purpose of this study was to assess the surface characterization and frictional resistance between stainless steel brackets and two types of orthodontic wires made of stainless steel and nickel-titanium alloys after immersion in a chlorhexidine-containing prophylactic agent. METHODS Stainless steel orthodontic brackets with either stainless steel (SS) or heat-activated nickel-t...

This paper investigates the effects of process parameters on weld bead width of austenitic stainless steel SS-310 in tungsten inert gas welding. The four parameters namely welding current, type of gas, gas flow rate and included angle of weld plates during butt joint were varied at three levels. The DOE approach was used to design experimental conditions. Orthogonal array L9 was used for carryi...

Friction coefficient and wear rate of different steel materials are investigated and compared in this study. In order to do so, a pin on disc apparatus is designed and fabricated. Experiments are carried out when different types of disc materials such as stainless steel 314 (SS 314), stainless steel 202 (SS 202) and mild steel slide against stainless steel 314 (SS 314) pin. Experiments are cond...

Aim: To evaluate the effect of ligation method on friction and the efficacy of the new slick elastomeric modules (TP Orthodontics, USA) and slide elastomeric modules (Leone Orthodontics, Italy) which claim to reduce friction at the module/wire interface. Materials and methods: Slick and slide modules were compared with regular modules, modules tied in figure of eight fashion, tight stainless st...

The austenitic stainless steel (SS) has been used as a material for  building  ultra  high  vacuum  (UHV)  chamber.  Recently significant  efforts  have  been  concerned  a  comparing  the standard  cleaned  for  ultra  high  vacuum,  passivity  stainless. In  this work Austenitic  nanocomposites were  synthesize by sol-  gel method. The morphologies  and  topographies  of  the samples  h...