Different compositions of Al–Cu alloys were directionally solidified upward with constant growth rate (V>18?6 mm s) and constant temperature gradient (G>4?7 K mm) using a Bridgman type growth apparatus. The variations in electrical resistivity r with temperature for directionally solidified Al–Cu alloys were measured in the range of 3732773 K using a standard four-point probe technique. Accordi...

a highly selective, sensitive, rapid and economical differential pulse polarographic method has been developed for the determination of trace amounts of antimony in various standard alloys and biological samples after adsorption of its 2-nitroso-1-naphthol-4-sulfonic acid - tetradecyldimethylbenzylammonium chloride on microcrystalline naphthalene in the ph range of 7.5-11.0. after filtration, t...

Superelastic wires and diamond-shaped stent surrogates were manufactured from Nitinol rods and tubing, respectively, from five different mill product suppliers - Standard VAR, Standard VIM, Standard VIM+VAR, Process-Optimized VIM+VAR, and High-Purity VAR. High-cycle fatigue tests up to 10(7) cycles were conducted under tension-tension conditions for wires and bending conditions for diamonds. Th...

In the present study, novel MRI compatible zirconium-ruthenium alloys with ultralow magnetic susceptibility were developed for biomedical and therapeutic devices under MRI diagnostics environments. The results demonstrated that alloying with ruthenium into pure zirconium would significantly increase the strength and hardness properties. The corrosion resistance of zirconium-ruthenium alloys inc...

statement of problem: element release from dental casting alloys into the oral environment is of clinical concern and is considered to be a potential health problem to all patients. purpose: the aim of this study was to investigate the metallic ion release of four base metal alloys. materials and methods: two ni-cr (minalux and supercast) and two co-cr alloys (minalia and wironit) were examined...

The hot deformation behavior and processing characteristics of AZ91 alloy and nano-SiCp/AZ91 composite were compared at temperature ranges of 523 K-673 K and strain rates of 0.001-1 s-1. Positive impact of SiC nanoparticles on pinning grain boundaries and inhibiting grain growth was not obvious when deformation temperature was below 623 K, but was remarkable when the temperature was above 623 K...

The mechanical properties, corrosion resistance and biocompatibility of the titanium-tantalum alloys together with pure titanium are comparatively studied for biomedical applications in this study. The experimental results confirm the previous theoretic investigation that tantalum has a potential to enhance the strength and reduce the elastic modulus of titanium alloys at the same time, and ind...

PURPOSE This study aimed to develop a copper-aluminium-nickel alloy which has properties comparable to that of dental alloys used for dental post and core applications with the reasonable cost. MATERIALS AND METHODS Sixteen groups of experimental copper alloys with variants of 3, 6, 9, 12 wt% Al and 0, 2, 4, 6 wt% Ni were prepared and casted. Their properties were tested and evaluated. The da...