In sheet metal forming processes with complex strain paths, a part is subjected to large plastic deformation. This severe plastic deformation leads to high plastic strain localization zones and subsequent accumulation of those strains. Then internal and superficial micro-defects and in other words ductile damage is created. This damage causes quality problems such as fracture. Therefore, design...

The finite element method (FEM) can be applied to practically analyze the tall buildings in which the shear walls are used to resist the lateral loads. Accordingly, a variety of displacement and strain-based as well as frame macro elements have been proposed for analysis of the tall buildings. With respect to application of the lower order plane stress elements, analytical problems may arise wi...

This paper investigated the effect of sensor density and alignment for three-dimensional shape sensing of an airplane-wing-shaped thick panel subjected to three different loading conditions, i.e., bending, torsion, and membrane loads. For shape sensing analysis of the panel, the Inverse Finite Element Method (iFEM) was used together with the Refined Zigzag Theory (RZT), in order to enable accur...

The need for compatibility between degrees of freedom of various elements is a major problem encountered in practice during the modeling of complex structures; the problem is generally solved by an additional rotational degree of freedom [1-3]. This present paper investigates possible improvements to the performances of strain based cylindrical shell finite element [4] by introducing an additio...

A procedure for efficient three-dimensional nonlinear time-history analysis of steel framed buildings is derived. It incorporates two types of nonlinear beam elements—the plastic hinge type and the elastofiber type—and nonlinear panel zone elements to model yielding and strain-hardening in moment-frames. Floors and roofs of buildings are modeled using 4-node elastic diaphragm elements. The proc...

This paper presents a simple method based on strain energy density criterion to study the crack initiation angle by finite element method under biaxial loading condition. The crack surface relative displacement method is used to eliminate the calculation of the stress intensity factors which are normally required. The analysis is performed using higher order four node quadrilateral element. The...

A carbon composite strain sensing system using an embedded array of polymide-coated fiber Bragg grating sensors, which are interrogated by a tunable laser, is described. The system is controlled from a personal computer using a customized program. The system was tested using a composite panel consisting of 28 plies of carbon fiber. Consistent strain measurements were achieved using a laser scan...

Generally, the finite element method is a powerful procedure for analysis of tall buildings. Yet, it should be noted that there are some problems in the application of many finite elements to the analysis of tall building structures. The presence of artificial flexure and parasitic shear effects in many lower order plane stress and membrane elements, cause the numerical procedure to converge in...

The free vibration analysis of the functionally graded cylindrical shell panels  with and without cutout is carried out using the finite element method based on a higher-order shear deformation theory. A higher-order theory is used to properly account for transverse shear deformation. An eight noded degenerated isoparametric shell element with nine degrees of freedom at each node is considered....