In this study, corrosion behaviour of A356-10 vol.% SiC composites casted by gravity and squeeze casting is evaluated. For this purpose, prepared samples were immersed in HCl solution for 1h at open circuit potential. Tafel polarization and electrochemical impedance spectroscopy (EIS) were carried out to study the corrosion resistance of composites. The Tafel polarization and EIS studies of ...

One of the attractive low activation steels is the austenitic Mn-Cr steel from the view point of waste disposal because of few long-lived nuclides. In this paper, three types of Mn-Cr austenitic steels were fabricated by vacuum induction furnace. Then plates with 10 mm thickness were fabricated by hot-rolling. The physical metallurgy of these steels was studied by the corrected Schaeffler diagr...

An experimentally obtained polarization curve for the hydrogen evolution reaction on silver in a 0.5 mol dm−3 solution was investigated using an electrochemical curve technique named the differential polarization method (DPM). The exchange current density estimated by the Tafel extrapolation method (TEM) and the DPM were compared and assessed from points of simple and more accurate handling. It...

The corrosion inhibition of AISI309 austenitic stainless steel by 2,2'-Bipyridyl in 0.5M H 2 SO 4 at 298K was studied using the mass loss’ method, the potentiodynamic polarization (Tafel), the linear polarization (LRP) and the electrochemical impedance spectroscopy (EIS). The results showed a mixed inhibition mode and an increase in the charge transfer resistance, due to inhibitor molecules’ ad...

This paper presents the results of study that was undertaken to investigate the ability of a new antiscale, polyacrylamide in solving problems found in cooling water systems. The effects of the polymer on C-steel and copper dissolution in synthetic cooling water environment were studied through scale, Tafel, and Linear polarization measurements. The results obtained from this study showed that ...

The phase formation of Ni-Ce composites onto a carbon steel electrode was investigated using electrochemical deposition. The anticorrosive properties of composite coating in 0.1 mol L HCl solution were studied by Tafel polarization and electrochemical impedance spectroscopy (EIS). Incorporation of CeO2 particles into the Ni matrices was found to improve corrosion resistance of pure Ni coatings....

The reduction of gaseous oxygen on carbon-supported plat inum electrodes has been studied at 150~ with polarization and potential decay measurements. The electrolyte was either 100 weight percent phosphoric acid or that acid with a fluorinated additive, potassium perfluorohexanesulfonate (C6FI3SO3K). The pseudo-Tafel curves of the overpotential vs. log (iiL/(iL -i)) show a two-slope behavior, p...

the aisi 316 l stainless steel (ss) specimens were exposed to passivation surface through two different processes including; holding in 40-vol% hno3 at temperature of 60 ºc for 30 min and 15-vol%h2so4 at ambient temperature for 1 hour. the corrosion behavior of specimens was evaluated in physiological solutions by electrochemical in vitro tests through linear and tafel polarization tests. cycli...

The corrosion behaviour of aluminium and6063 aluminium alloy was investigated in phosphoric acid of different concentrations at different temperatures. The study was done by electrochemical method, using Tafel polarization and electrochemical impedance spectroscopy (EIS) techniques. The kinetic parameters and thermodynamic parameters were calculated using Arrhenius theory and transition state t...

Corrosion inhibition of mild steel in 1 M HCl and 0.5 M H2SO4 by dapsone were studied by polarization resistance, Tafel polarization, electrochemical impedance spectroscopy (EIS) and weight loss measurement. Results obtained revealed that inhibition occurs through adsorption of the drug on metal surface without modifying the mechanism of corrosion process. Potentiodynamic polarization suggested...