Various green projects were executed to reduce the energy consumption in building sector. In particular, it is necessary to improve the thermal insulation performance of existing residential buildings. Even though it is critical to evaluate the thermal insulation performance in operation and maintenance phase, most of the policies and previous studies have focused on thermal insulation material...

In this paper, the thermal performance of four common insulators in two internal and external insulation systems is investigated for the ASHRAE setpoint range by applying detailed numerical simulation and Anti-Insulation phenomenon. Anti-Insulation phenomenon and consequent extra load on the HVAC system can occur following the thermal insulation of a building if proper temperature setpoint is n...

pulse-width modulated (pwm) adjustable frequency drives (afds) are extensively used in industries for control of induction motors. it has led to significant advantages in terms of the performance, size, and efficiency but the output voltage waveform no longer remains sinusoidal. hence, overshoots, high rate of rise, harmonics and transients are observed in the voltage wave. they increase voltag...

Brooke, 0. G. (1973). Archives of Disease in Childhood, 48, 901. Thermal insulation in malnourished Jamaican children. The mean summed skinfold at 6 sites in 20 malnourished Jamaican children was 24 5 mm on admission to hospital and 49 8 mm on discharge. Marasmic children initially had thinner skinfolds than children with oedematous malnutrition, and they had a highly significant reduction in t...

Moisture inside the footwear can considerably affect the thermal insulation. In this study with a thermal foot model there was simulated three sweat rates (3, 5 and 10 g/h). Five types of footwear with various insulation levels (dry insulation from 0.19 to 0.50 m2. K/W) were tested. The footwear insulation reduction was calculated for 1.5 hour period. The reduction in insulation was related to ...

This study compared the methods of determining the footwear insulation on human participants and the thermal foot model. Another purpose was to find the minimal number of measurement points on the human foot that is needed for insulation calculation. Bare foot was tested at 3 ambient temperatures on 6 participants. Three types of footwear were tested on 2 participants. The mean insulation for a...

High voltage generators are being subject to higher voltage rating and are being designed to operate in harsh conditions. Stator windings are the main component of generators in which Electrical, magnetical and thermal stresses remain major failures for insulation degradation accelerated aging. A large number of generators failed due to stator winding problems, mainly insulation deterioration. ...

Air-Conditioning (AC) systems are responsible for a considerable portion of the energy consumption in buildings located in high cooling load requiring regions of Iran. In addition, the heat flow through the buildingschr('39') external walls plays a major role in cooling load estimations for the countrychr('39')s hot regions. Therefore, application of insulation materials in external walls has g...