This article presents methods for estimating lateral vehicle velocity and tire cornering stiffness, which are key parameters in vehicle dynamics control, using lateral tire force measurements. Lateral tire forces acting on each tire are directly measured by load-sensing hub bearings that were invented and further developed by NSK Ltd. For estimating the lateral vehicle velocity, tire force mode...

The effect of vehicle active safety systems is subject to the friction force arising from the contact of tires and the road surface. Therefore, an adequate knowledge of the tire-road friction coefficient is of great importance to achieve a good performance of these control systems. This paper presents a tire-road friction coefficient estimation method for an advanced vehicle configuration, four...

This paper presents a process for the estimation of tire-road forces, vehicle sideslip angle and wheel cornering stiffness. The method uses measurements (yaw rate, longitudinal/lateral accelerations, steering angle and angular wheel velocities) only from sensors which can be integrated or have already been integrated in modern cars. The estimation process is based on two blocks in series: the f...

Tire forces are the major forces propelling the road vehicles. They significantly affect the dynamic behavior of the vehicles. Estimation of the tire forces is essential in vehicle dynamics and control. This paper presents an observer-based scheme for estimation of the longitudinal tire force of electric vehicles in real time. The observer is based on a nonlinearity observer method. The pole-pl...

Thispaper applies extended Kalman–Bucyfiltering (EKBF)and Bayesianhypothesisselectionto estimate motion, tire forces, and road coefficientof friction (p) of vehicle8on asphalt surfaces.The EKBFestimatesthe state and tire forcesof an eight-degree-of-freedomvehiclefrom vehicle-mountedsensors.The filter requiresno a prioriknowledgeof p and does not require a tire force model. Resultingforce, slip,...

This paper introduces a technique that relates the coefficients of the Magic Formula tire model to the physical properties of the tire. For this purpose, the tire model is developed by ABAQUS commercial software. The output of this model for the lateral tire force is validated by available tire information and then used to identify the tire force properties. The Magic Formula coefficients are o...

Direct tire-road contact friction estimation is essential for future autonomous cars and active safety systems. Friction estimation methods have been proposed earlier for driving conditions in the presence of a slip angle or slip ratio. However, the estimation of the friction from a freely-rolling tire is still an unsolved topic. Knowing the existing friction potential would be beneficial since...