This paper analyses and compares PWM control strategy of control and buffer type soft switching half bridge DC/DC converter. Finally, the soft switching condition are analyzed, and this article gets the realization of soft switching conditions of the three half bridge DC/DC converter and the influence factors of soft switching conditions of the three half bridge DC/DC converter. Characteristics...

In this paper, a new bidirectional buck-boost dc-dc converter with capability of soft switching and zero input current ripple is proposed. The coupled inductor is used in the proposed converter to eliminate the input current ripple. In the proposed converter, zero voltage switching (ZVS) and zero current switching (ZCS) can be obtained for the main and auxiliary switches, respectively. In addit...

Addition of an input filter to a current-programmed converter can cause the controller to oscillate. Two instability mechanisms can typically occur: 1) the current programmed controller effective current feedback loop may become unstable, or 2) the controller effective input voltage feed forward loop, which becomes a positive feedback loop when an input filter is added, may oscillate. Design cr...

--There are several approaches to nonisolated dc-dc conversion for use when the input varies above and below the output. Among these are the SEPIC, buck-boost and others involving a combination of buck and boost circuits. This paper contains an analysis of four types, with particular attention to the efficiency in a typical application.

This article presents a novel dual-mode five-level common grounded type (5L-DM-CGT) transformerless inverter topology for medium-power application with wide input voltage range (200–400 V). It consists of nine semiconductor switches, two inner flying-capacitors, and small LC filter at the output side. Due to direct connection negative terminal photovoltaic neutral point grid, there is no leakag...

Received Jan 8, 2018 Revised Mar 23, 2018 Accepted Apr 11, 2018 Distributed energy source based electricity generation is an essential factor for the economic growth and development of a country. The photovoltaic, fuel cell and battery based power generation offer a high voltage gain. The DC-DC CUK converter based on both buck and boost mode of operation is proposed for high gain dc link voltag...

In this paper, we derive the discrete-time model for the power-factor-correction (PFC) buck-boost converter in terms of a stroboscopic switching map. Fast-scale instability is analysed through a fold diagram, which exposes the periodicity of the operation as well as the locations of the critical phase angles of the line voltage at which instability begins to occur along a half-line cycle. The a...

To raise the utilization ratio of lithium-ion battery in portable devices, a novel green-switch controller IC is proposed to constitute a 4-switch cascade buck–boost prototype, which is capable of outputting non-inverting step down and step up voltages. According to the relations between the input and output voltages through duty ratio, a finite state machine automatically determines the work m...

Abstract: The main objective of this paper was to study a bidirectional direct current to direct current converter (BDC) topology with a high voltage conversion ratio for electric vehicle (EV) batteries connected to a dc-microgrid system. In this study, an unregulated level converter (ULC) cascaded with a two-phase interleaved buck-boost charge-pump converter (IBCPC) is introduced to achieve a ...

This paper presents an electric drive system whose motor is connected to a battery by means of a buck DC/DC converter. This motor is further connected to an ultracapacitor by means of a boost DC/DC converter. First, operation and break processes are studied when the converters are switched off as well as when they are switched on in current limitation mode. Then, a comparative analysis of the r...