Ultrasonic transducers play a significant role in generating and receiving the acoustic waves in ultrasonic flowmeters. Depending on the required accuracy, the ultrasonic transducers can be installed either in one pair or more in an ultrasonic flowmeter. The main part of an ultrasonic transducer is its piezoceramic element. In this work, four piezoceramic elements with different diameter to thi...

The principles of operation and design immersion ultrasonic transducers developed by the authors for excitation reception elastic vibrations in moving filament-like plane-parallel materials, particular, polymer fibbers films, with an adjustable angle input (reception) probing signals into controlled object – films at normal high temperatures.
 technical characteristics installation are giv...

Capacitive Micro-machined Ultrasonic Transducers (CMUTs) are the ultrasonic devices which produce better features in contrast to piezoelectric transducers. The intrinsic parameter of CMUT varies with the variation in geometrical dimension of the device. The cavity height and the radius of the CMUT with circular membrane is varied in the lumped parallel plate model for its impact on the paramete...

Flexural ultrasonic transducers are principally used as proximity sensors and for industrial metrology. Their operation relies on a piezoelectric ceramic to generate a flexing of a metallic membrane, which delivers the ultrasound signal. The performance of flexural ultrasonic transducers has been largely limited to excitation through a short voltage burst signal at a designated mechanical reson...

Modulus of elasticity is one of the important parameters of construction materials, which considerably influence their deformation properties and which can also be determined by means of non-destructive test methods like ultrasonic pulse method. However, measurement results of ultrasonic pulse methods are influenced by various factors, one of which is the natural frequency of the transducers. T...

Metal structures can fail because of fatigue crack propagation or because of section loss from corrosion. Regular inspection is required to detect such failures. We report here progress toward the development of MEMS-based transducers for ultrasonic flaw detection, to be permanently mounted at critical locations on structures. In a complete system, a single piezoelectric element will be used to...

Ultrasonic ranging is the most common method used in robotic systems for distance or proximity sensing. The heart of the method is an ultrasonic transducer that emits and detects ultrasound. There are mainly two types of transducers existing in the market today; piezoelectric and electrostatic. In this paper, we propose the use of a new type of transducer, which is capacitive micromachined ultr...

Finite element method (FEM) has been employed extensively for vibration modal analysis of piezoelectric transducers and devices. In recent years, there has been a growing interest in the simulation and analysis of piezoelectric transducers by using equivalent electrical circuit models. This paper has been devoted to such approach for two designed and fabricated ultrasonic sandwich transducers h...

A system for applying local hyperthermia employing ultrasonic transducers with annular focusing lenses gave better temperature uniformity in small fibrosarcomas than conventional unfocused transducers. The lenses were designed for ultrasonic frequencies of 3, 4, 5 and 9 MHz for tumors approximately 6 mm dia. Tests in degassed water indicated that the focusing lenses concentrated approx. 80% of ...

Ultrasonic transducers are integrated into the minimally invasive needles and catheters for medical diagnostic. There is a need for a model that can predict the behavior of the ultrasonic transducer. Many designers employ one dimensional analytic models, however due to certain limitations these models are not adequate to understand the entire performance of an ultrasonic transducer. Nowadays, f...