نتایج جستجو برای: Viscoelastic model

تعداد نتایج: 2113846  

Journal: :journal of agricultural science and technology 2015
ł. dzadz m. markowski p. sadowski a. jakóbczak m. janulin

the effect of temperature on the viscoelastic behavior of chicken meat frankfurters was assessed by creep recovery tests. compression creep-recovery tests were performed at room temperature (20°c) and refrigeration (5°c) on samples of cylindrical shape. the viscoelastic behavior of samples was characterized based on the parameters of the four-element burgers model. during the compression phase,...

Journal: :علوم و تکنولوژی پلیمر 0
محمدرضا عرب بافرانی تهران، دانشگاه تربیت مدرس، دانشکده مهندسی شیمی، بخش مهندسی پلیمر، صندوق پستی 114-14115 مهدی رزاقی کاشانی تهران، دانشگاه تربیت مدرس، دانشکده مهندسی شیمی، بخش مهندسی پلیمر، صندوق پستی 114-14115

one of the most important factors that affect tire friction is surface roughness, which determines the size of the real contact area, real pressure distribution on the contact interface, and scales of mechanical engagement between viscoelastic rubber and a rough substrate. the need to predict coefficient of friction (cof) for rubber on rough surfaces for applications such as traction of tires o...

K Kaur K.C Gupta R Kakar,

The purpose of this paper is to analysis the viscoelastic models under dynamic loading. A five-parameter model is chosen for study exhibits elastic, viscous, and retarded elastic response to shearing stress. The viscoelastic specimen is chosen which closely approximates the actual behavior of a polymer. The module of elasticity and viscosity coefficients are assumed to be space dependent i.e. f...

Journal: :journal of mining and environment 2013
reza rahmannejad a.i. sofianos

wall displacements and ground pressure acting on the lining of a tunnel increase with time. these time-dependent deformations are both due to face advance effect and to the time-dependent behavior of the rock mass.  viscoelastic materials exhibit both viscous and elastic behaviors. thorough this study, the effect of different linear viscoelastic models including maxwell, kelvin and kelvin-voigt...

K Kaur R Kakar,

This study is concerned to check the validity and applicability of a five parameter viscoelastic model for harmonic wave propagating in the non-homogeneous viscoelastic rods of varying density. The constitutive relation for five parameter model is first developed and validity of these relations is checked. The non-homogeneous viscoelastic rods are assumed to be initially unstressed and at rest....

Journal: :مکانیک سیالات و آیرودینامیک 0
علی عباس¬نژاد محمود نوروزی زکیه طالبی

the purpose of this research is to numerically investigate the interaction of pulsatile flow of blood with an axisymmetric artery in various percentages of stenosis. the carreau non-newtonian model and the generalized maxwell rheological model were used to model the blood fluid and the viscoelastic wall of arterial, respectively. the innovation of the present research is modeling of viscoelasti...

Journal: :علوم کاربردی و محاسباتی در مکانیک 0
سیدرسول واردی محمدجواد مغربی محمود نوروزی محمدمحسن شاهمردان

in this paper, the transient inertial viscoelastic flow around a circular cylinder is investigated numerically. a second order finite-volume method is used to increase the numerical accuracy. here, the giesekus model is used as the constitutive equation. this nonlinear model has prominent ability in describing normal stress differences and viscosity in power-law regions. the impacts of the elas...

Journal: :journal of petroleum science and technology 2014
maryam jouyandeh mehdi moayed mohseni fariborz rashidi

a theoretical solution is presented for the forced convection heat transfer of a viscoelastic fluid obeying the giesekus constitutive equation in a concentric annulus under steady state, laminar, and purely tangential flow. a relative rotational motion exists between the inner and the outer cylinders, which induces the flow. a constant temperature was set in both cylinders, in this study. the f...

Journal: :journal of computational applied mechanics 0
zahra matin ghahfarokhi department of mechanical engineering, isfahan university of technology, isfahan, iran mehdi salmani tehrani department of mechanical engineering, isfahan university of technology, isfahan, iran mahdi moghimi zand school of mechanical engineering, college of engineering, university of tehran, tehran, iran mojtaba mahzoon department of mechanical engineering, university of shiraz, shiraz, iran

needle insertion is a minimally invasive technique in diagnosing and treating tumors. however, to perform a surgery accurately, the tissue should have minimum amount of displacement during needle insertion so that it reaches the target tissue. therefore, the tissue membrane has to move less to decrease rupturing under the membrane. in this study, the effect of different design parameters on dis...

K Asemi, M Babaei P Safarpour

In this paper, natural frequencies and dynamic response of thick beams made of saturated porous materials resting on viscoelastic foundation are investigated for the first time. The beam is modeled using higher-order beam theory. Kelvin-voight model is used to model the viscoelastic foundation. Distribution of porosity along the thickness is considered in two different patterns, which are symme...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید