in this work, homogeneous thermochemical co-precipitation method was used to fabricate w-25wt%cu nanocomposite. synthesized nanocomposite powder was calcined and reduced. a hydrogen atmosphere sintering at 1200oc for 105 consolidated the product up to a density close to 98% theoretical density. wear experiment were carried out using a pin-ondisc set up at three normal loads of 5, 10 and 15 n an...

Carbon nanotube (CNT) reinforced Cu matrix (CNT/Cu) nanocomposites are fabricated by a novel fabrication process, named as molecular evel process, which involves suspending CNTs in solvent by surface functionalization, mixing Cu ions with CNT suspension, drying, calcination nd reduction. The molecular level process produces CNT/Cu nanocomposite powders, in which the CNTs are homogeneously impla...

Tribological behavior of Cu-MoS2 and Ag-MoS2 nanocomposite lubricant was studied. Cu nanoparticles produced by electrical explosion of copper wires and Ag nanoparticles prepared by electrospark erosion were employed as metal cladding modifiers of MoS2 nanolamellar particles. The tribological tests showed Cu-MoS2 and Ag-MoS2 nanocomposite lubricants changed the friction coefficient of the initia...

The aim of this research is the thermostructural study of Cu-Ti, Cu-Ti 1 vol% multiwall carbon nanotubes (MWCNTs) and Cu-Ti 3 vol% MWCNTs. Several investigation techniques were used to achieve this objective. Dilatometric data show that the coefficient of thermal expansion of the nanocomposite containing less multiwall carbon nanotubes is linear and small. The same nanocomposite exhibits regula...

We demonstrate a template-free synthetic approach for the preparation of a highly conductive Cu/Cu(2)O nanocomposite electrode by a chemical reduction process. Cu(2)O octahedra were prepared through chemical dehydrogenation of as-synthesized Cu(OH)(2) nanowire precursors. To provide a sufficiently electron-conducting network, the Cu(2)O particles were transformed into Cu/Cu(2)O nanocomposites b...

We report the structural, morphological, and electrochemical properties of polypyrrole (PPy), copper doped PPy (Cu/PPy), multi-walled carbon nanotubes (Cu/PPy/MWCTs) prepared by oxidative polymerization technique. The incorporation Cu in form nanoparticles composites was confirmed from XRD data. granular morphology observed FESEM micrograph. However, size grains decreased with nanoparticle inse...

In this work, homogeneous thermochemical co-precipitation method was used to fabricate W-25wt%Cu nanocomposite. Synthesized nanocomposite powder was calcined and reduced. A hydrogen atmosphere sintering at 1200oC for 105 consolidated the product up to a density close to 98% theoretical density. Wear experiment were carried out using a pin-ondisc set up at three normal loads of 5, 10 and 15 N an...

In this work, homogeneous thermochemical co-precipitation method was used to fabricate W-25wt%Cu nanocomposite. Synthesized nanocomposite powder was calcined and reduced. A hydrogen atmosphere sintering at 1200oC for 105 consolidated the product up to a density close to 98% theoretical density. Wear experiment were carried out using a pin-ondisc set up at three normal loads of 5, 10 and 15 N an...

Ni57Zr22X8Nb8Al5 (X = Ti, Cu) metallic glass (MG) and nanocomposite powders were synthesized by mechanical alloying. Outstanding differences in glass-forming ability (GFA), thermal property, particle size and crystallization behavior were found for the two synthesized alloy powders with different alloying substitutions. The Ti-containing MG powder exhibits better GFA, higher thermal stability, ...

Nanocomposite materials of the Fe-Cu system with/without small addition of carbon nanotubes have been synthesized by mechanochemical activation of elemental Fe and Cu powders in a high-energy planetary ball mill and have been examined by the X-ray diffraction method, SEM and the thermopower methods; the tensile strength of the materials obtained has been estimated. The metastable (Fe, Cu) super...