fluid invasion from water-based drilling mud (wbdm) into the shale formations causes swelling,high pressure zone near the wellbore wall, and eventually wellbore instability problems duringdrilling operations. for the stability of the wellbore, physical plugging of nanoscale pore throats couldbe considered as a logical approach toward avoiding the fluid invasion into the shale formation. thispap...

Wellbore instability is one of the major problems that hamper the drilling speed in Halfaya Oilfield. Comprehensive analysis of geological and engineering data indicates that Halfaya Oilfield features fractured shale in the Nahr Umr Formation. Complex accidents such as wellbore collapse and sticking emerged frequently in this formation. Tests and theoretical analysis revealed that wellbore inst...

Fluid invasion from water-based drilling mud (WBDM) into the shale formations causes swelling, high pressure zone near the wellbore wall, and eventually wellbore instability problems during drilling operations. For the stability of the wellbore, physical plugging of nanoscale pore throats could be considered as a logical approach toward avoiding the fluid invasion into the shale formation. This...

The past decade has seen increased focus on nanoparticle (NP) based drilling fluid to promote wellbore stability in shales. With the plugging of NP into shale pores, the fluid pressure transmission can be retarded and wellbore stability can be improved. For better understanding of the interaction between shale and NP based drilling fluid based on previous pressure transmission tests (PTTs) on A...

Drill cuttings are considered representative of the lithology being drilled in a wellbore. However, the fragments that are two to three times larger and/or having odd shapes compared to the regular cuttings are commonly understood as cavings from the wall of the borehole and they are seldom of any help in compilation of a lithology. In fact, cutting description manual recommends ignoring cuttin...

Some fundamental mechanisms associated with cooling/heating of the rock in the context of drilling and reservoir stimulation in enhanced geothermal systems are described. The role of temperature and pore pressure in wellbore failure and fracture width is considered using analytical and boundary element models. Results indicate that cooling induces a pore pressure drop inside the formation that ...

wellbore instability is a quite common event during drilling, and causes many problems such as stuck pipe and lost circulation. it is primarily due to the inadequate understanding of the rock properties, pore pressure, and earth stress environment prior to well construction. this study aims to use the existing relevant logs, drilling, and other data from offset wells to construct a precise mech...

Piedmont tectonic belts are rich of oil and gas resources, however the intense tectonic stress and broken formation may cause great drilling problems in piedmont structures such as borehole collapse, lost circulation and gas cutting. Through analysis of in situ stress properties, bedding structure and mechanical characteristics, wellbore instability mechanism was expounded from rock mechanics, ...

Reservoir shale has the characteristics of bedding planes, strong anisotropy, and imbibition ability under ultralow water saturation, which an important impact on wellbore stability horizontal wells. Therefore, physical chemical properties reservoir were analyzed, a mechanics model was established considering elasticity strength anisotropy. The analyzed anisotropy parameters formation condition...