This paper discusses the use of Linear Mixed Models (LMM) and Generalized Linear Mixed Models (GLMM) to predict the wear and damage trajectories of railway wheelsets for a fleet of modern multiple unit trains. The wear trajectory is described by the evolution of the wheel flange thickness, the flange height and the tread diameter; whereas the damage trajectory is assessed through the probabilit...

Wheel wear has been a concern in the railway for several decades. Studying the form change of the wheel/rail contacts in particular railways consisting of sharp curves helps to identify the risk of severe or catastrophic wear to minimize maintenance costs in order to be competitive in the transportation business. In this paper, the wheel/rail contact was studied on the particular railways. The ...

apart from regular wheel wear such as decreasing wheel diameters and reduced flange thicknesses and heights, wheel flats (wf) and oval wheels (or oor, out-of-roundness) are the most common wheelset problems for railway vehicles. within the fp7 research project “saferail”, apt has developed an innovative wheelset monitoring system so-called “wheel flat and out of roundness monitoring (worm) syst...

Lubrication on sharp curves has been commonly adopted as a method of reducing friction between the wheel flange and rail gauge face to minimize wear and energy consumption. Additionally, lubrication between the running surface of the low-rail and the wheel tread has recently been recognized as a significant factor in reducing the likelihood of low-rail corrugation, squealing noise and rail gaug...

Apart from regular wheel wear such as decreasing wheel diameters and reduced flange thicknesses and heights, wheel flats (WF) and oval wheels (or OOR, Out-Of-Roundness) are the most common wheelset problems for railway vehicles. Within the FP7 Research Project “Saferail”, APT has developed an innovative wheelset monitoring system so-called “Wheel flat and Out of Roundness Monitoring (WORM) syst...

When railway vehicles run on sharp curves, the coefficient of friction (COF) between outer rail and leading-outside wheel flange a bogie is an important value related to problems such as wheel/rail severe wear, squeak noise arising from contact, running safety against flange-climb derailment. In general, it difficult grasp actual state COF, which changes moment during commercial operations. Fro...

When a railway vehicle moves on curved rail, sliding contact between the rail head side and wheel flange causes wear flange. Traditionally, with thinned is machined to get minimum thickness specified for structural safety. This operation reduces rim shortens life of wheel. In present study, flanges were hard-faced by submerged arc welding. A welding wire, which has good weldability base materia...