The aim of this study was to prepare β-wollastonite using a green synthesis method (autoclaving technique) without organic solvents and to study its bioactivity. To prepare β-wollastonite, the precursor ratio of CaO:SiO₂ was set at 55:45. This mixture was autoclaved for 8 h and later sintered at 950 °C for 2 h. The chemical composition of the precursors was studied using X-ray fluorescence (XRF...

The current investigation was aimed at identifying the role of mesoporous wollastonite particles on the healing of rat tibial bone defect. The bone defect was created with a 3-mm-diameter dental drill, and it was filled with mesoporous wollastonite particles. After second and fourth weeks of filling treatments, it was found that mesoporous wollastonite particles promoted bone formation as evide...

Powdered and pelletized wollastonite (CaSiO3) was applied to an 11.8 ha forested watershed at the Hubbard Brook Experimental Forest (HBEF) in northern New Hampshire, U.S.A. during October of 1999. The dissolution of wollastonite was studied using watershed solute mass balances, and a Sr/ Sr isotopic tracer. The wollastonite (Sr/Sr = 0.70554) that was deposited directly into the stream channel b...

Medical and environmental surveys were conducted at a wollastonite mine and mill in 1976 and in 1982. Health testing included chest radiography, spirometry, and a questionnaire. Workers at a nearby electronics plant were also examined in 1982 for a comparison of lung function and respiratory symptoms. Both wollastonite and control workers showed significant smoking effects for chronic respirato...

Wollastonite is a naturally occurring acicular or fibrous metasilicate used in ceramics and as a substitute for asbestos in some applications. Wollastonite fibers are rather similar in form, length, and diameter to amphibole asbestos fibers but mineralogically they are different. Dust measurements in both the Finnish limestone--wollastonite quarry and in the flotation plant yielded high concent...

In the past 2 decades, wollastonite has been studied thoroughly for its application as a bone implant material due to its biocompatibility, high mechanical strength, and excellent bioactivity when compared to calcium phosphates bioceramics. Wollastonite was prepared through the low-temperature sol-gel combustion method using urea as the fuel, nitrate ions and nitric acid as the oxidizer. Calciu...

Wollastonite (CaSiO3) and diopside (CaMgSi2O6) silicate ceramics have been widely investigated as highly bioactive materials, suitable for bone tissue engineering applications. In the present paper, highly porous glass-ceramic foams, with both wollastonite and diopside as crystal phases, were developed from the thermal treatment of silicone polymers filled with CaO and MgO precursors, in the fo...

Wollastonite fibers were tested in vitro for their ability to produce reactive oxygen species (ROS) with two different systems: a cell-free reactive mixture containing deoxyribose and a polymorphonuclear leukocyte suspension. After adding the fibers, we measured the thiobarbituric acid-reactive substances produced by deoxyribose degradation and luminol-enhanced chemiluminescence, respectively. ...

We have performed an experimental study of the influence of varying size and charge on cation partitioning between wollastonite and silicate-carbonate melt in the system CaCO3-SiO2. The experimental conditions (3 GPa, 14208C) lie close to the wollastonite II tc/I tc phase boundary. Results for 1+, 2+, 3+ and 4+ partitioning show parabolic dependence of partition coefficients on ionic radius, wh...