نتایج جستجو برای: Wound Rotor (WR) Resolver
تعداد نتایج: 89350 فیلتر نتایج به سال:
In this article, field-reconstruction method (FRM) is proposed for predicting the performance of different types rotational resolvers, including wound-rotor (WR) and variable reluctance (VR) ones. The main features developed are comparable accuracy with that finite element (FEM) as well much less computational burden. deviation model in prediction position error WR VR resolvers than 3%. However...
Wound-Rotor (WR) resolvers are the most widely used position sensors in applications with harsh environmental conditions. However, their performance is exposed to failure due to the high risk of short circuit (SC) fault. Although the output current of the resolver is negligible, its thin copper wires increase the probability of the short circuit fault. To avoid the propagation of the turn-to-tu...
Disk Type Variable Reluctance (DTVR) resolvers have distinguished performance under run out fault comparing to conventional sinusoidal rotor resolvers. However, their accuracy under inclined rotor fault along with different types of eccentricities includes static and dynamic eccentricities are questioned. Furthermore, due to thin copper wires that are used for signal and excitation coils of res...
A simple method to demodulate the resolver signal is introduced in this article. The proposed method can provide the demodulated resolver quadrature signals, sine and cosine, without requiring the resolver excitation signal as the carrier signal. Therefore, the phase delay between the stator winding and the rotor winding is avoided. The configuration of this approach consists of commercial avar...
This paper addresses self-sensing (“sensorless”) control of salient-pole permanent magnet synchronous motors (PMSM’s). The major contribution of this work is the introduction of a simple-to-implement estimation technique that operates over a wide speed range, including zero speed. The technique achieves simplicity by decoupling the inherent cross-coupling in PMSM’s. The technique utilizes the d...
This contribution describes a new FPGA based method to convert the analog resolver signals to a digital position signal using Delta Sigma ADC technology. By using a 2 order ∆Σ modulator it is possible to increase the effective resolution. In a servo drive the significant better signal to noise ratio can be used to build a smoother motor current (less noisy), or to increase the tracking loop ban...
A resolver is a position sensor or transducer that measures the instantaneous angular position of the rotating shaft to which it is attached. Resolver produces two amplitude modulated signals; SIN and COS as output signals. These two signals need to be demodulated and converted to digital signals before they can be used for control. There are several techniques available in the literature to me...
A mathematical model based on d-q axis theory and dynamic performance characteristic of brushless resolvers is discussed in this paper. The impact of rotor eccentricity on the accuracy of position in precise applications is investigated. In particular, the model takes the stator currents of brushless resolver into account. The proposed model is used to compute the dynamic and steady state e...
Permanent magnet and wound rotor synchronous machines (PMSMs and WRSMs) are often used in diesel enginebased portable power generation systems. In these applications, there is a growing desire to improve machine efficiency in order to reduce fossil fuel requirements. In addition, there is a desire to reduce mass to improve mobility. To attempt to address these competing performance objectives, ...
The rotor configuration of the brushless doubly fed induction generator (BDFIG) plays an important role in its performance. In order to make the magnetomotive force (MMF) space vector in one set rotor windings to couple both magnetic fields with different pole-pair and have low resistance and inductance, this paper presents a novel wound rotor type for BDFIG with low space harmonic contents. In...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید