The three dimensional atom probe (3DAP) is the only tomography technique with an atomic resolution. Due this unique feature, it has been widely used in semi-quantitative compositional analyses of solute clusters and nanosized precipitates in alloys. Various microalloying effects in the precipitation processes of aluminum alloys have been investigated using the 3DAP. The most well-known example ...

Niobium is recognized as an important alloying element in a number of wrought precipitation-hardened nickel-base alloys. It is the purpose of this paper to examine the role that niobium plays in these alloys and describe the properties that are achieved as a result of its inclusion in wrought superalloys. In addition to the general alloying characteristics of niobium as described in the technic...

Traditionally, titanium alloys with satisfactory mechanical properties can only be produced via energy-intensive and costly wrought processes, while titanium alloys produced using low-cost powder metallurgy methods consistently result in inferior mechanical properties, especially low fatigue strength. Herein, we demonstrate a new microstructural engineering approach for producing low-cost titan...

the global environmental concerns have put the light weighting of structures on the fore front of the research in transportation industry. among other light weight alloys, the transportation industry is considering magnesium intensive light body-in-white structure in automotive applications. although the research in modeling technique areas is very active, a suitable practical model mimicking t...

The main task of this work was to study the influence of the cooling conditions after homogenization of the 6082 aluminium alloys. The effect of the solution heat treatment temperature on the mechanism and ageing kinetics of the two commercial wrought aluminum alloys 6005 and 6082 was also analyzed. The alloys were heat treated—T4 with a wide range of solution heat treatment temperature from 51...

Using uniaxial tensile and hardness testing, we evaluated the variability and anisotropy of the mechanical properties of an austenitic stainless steel, UNS S17400, manufactured by an additive process, selective laser melting. Like wrought materials, the mechanical properties depend on the orientation introduced by the processing. The recommended stress-relief heat treatment increases the tensil...

Insertion of metal implants is associated with a possible change in the delicate balance between pro- and anti-inflammatory proteins, probably leading to an unfavourable predominantly pro-inflammatory milieu. The most likely cause is an inappropriate activation of macrophages in close relation to the metal implant and wear-products. The aim of the present study was to compare surfaces of as-cas...

The microstructural and mechanical properties of the hard phases in CoCrMo prosthetic alloys in both cast and wrought conditions were examined using transmission electron microscopy and nanoindentation. Besides the known carbides of M(23)C(6)-type (M=Cr, Mo, Co) and M(6)C-type which are formed by either eutectic solidification or precipitation, a new mixed-phase hard constituent has been found ...

The objective of the present work is to study the casting characteristics of various A1-Li alloys, which include fluidity and strengths of the alloys and their interaction with cast molds. Materials investigated are Al-Li-Mg and Al-Li-Cu-Mg alloys with Li content of 2.5 wt%. The results show that sand molds with resin binders are good for A1-Li casting. Ceramic coatings can further reduce the m...