Modularity in total hip arthroplasty provides multiple benefits to the surgeon in restoring the appropriate alignment and position to a previously damaged hip joint. The vast majority of modern implants incorporate modularity into their design with some implants having multiple modular interfaces. There is the potential for failure at modular junctions because of fretting and crevice corrosion ...

To study the durability of shield tunnel concrete segment under coupling multi-factors, the durability and degradation law of reinforced concrete segments under the joint action of carbonation, sulfate, chloride salt and stray current was studied by accelerated environmental and direct current (DC) power simulation test. The results show that the presence of the stray current not only accelerat...

Title of Dissertation: CREEP CORROSION OVER PLASTIC ENCAPSULATED MICROCIRCUIT PACKAGES WITH NOBLE METAL PREPLATED LEADFRAMES Ping Zhao, Doctor of Philosophy, 2005 Dissertation Directed By: Dr. Michael Pecht, Professor, Department of Mechanical Engineering Field failures were observed to be caused by the bridging of corrosion products across lead fingers. This phenomenon was identified as creep ...

The aging of reinforced concrete infrastructure in developed countries imposes an urgent need for methods to reliably assess the condition of these structures. Corrosion of the embedded reinforcing steel is the most frequent cause for degradation. While it is well known that the ability of a structure to withstand corrosion depends strongly on factors such as the materials used or the age, it i...

PURPOSE Clinical cases of stent-fractures show that corrosion behavior might play a role in these fractures. Implanted in vivo, especially in combination with other implanted foreign materials, these metallic products are exposed to special conditions, which can cause a process of corrosion. Here, we aimed to test the corrosion potential of stents made of different materials in an in vitro sett...

The effect of Cr(VI) pollution on the corrosion rate of corrugated iron roof samples collected from tanning industry areas was investigated through simulated laboratory exposure and spectrophotometric detection of Cr(III) deposit as a product of the reaction. The total level of Cr detected in the samples ranged from 113.892 ± 0.17 ppm to 53.05 ± 0.243 ppm and showed increasing trend as sampling...

In corrosion protection study, it is important to develop economically attractive test method for mitigation of corrosion damage of coated structure. Faster predication of protective behavior of any coating is a big challenge for the coating industries. In present work, in-house waterborne anticorrosive coating system was selected for study. The corrosion protection of coating evaluated as per ...