In the present work the recrystallization behavior of deep drawing grade Al-killed low carbon steel sheets produced by Mobarakeh Steel Plant (MSP) has been studied. Salt bath isothermal annealing has b...

in the present study, the influence of annealing temperature on mechanical properties and the microstructure of a high manganese austenitic steel (fe-30mn-4al-4si-0.5c) was investigated. x-ray diffractometry, optical and scanning electron microscopy, hardness and tensile tests were used to analyze the relationship between mechanical properties and microstructure after annealing process. the res...

the formation of nano/ultrafine grained ferrite in low carbon steels containing different amounts of niobiumwas investigated using thermomechanical treatment which consisted of annealing of 85% cold rolled martensite with different parameters. the specimens were characterized by optical and scanning electron microscopy and vickers hardness test. a lamellar dislocation cell structure was formed ...

Probing the lowest energy configuration of a complex system by quantum annealing was recently found to be more effective than its classical, thermal counterpart. By comparing classical and quantum Monte Carlo annealing protocols on the two-dimensional random Ising model (a prototype spin glass), we confirm the superiority of quantum annealing relative to classical annealing. We also propose a t...

This paper reports on the precipitation behaviour and microstructural evolution in ~20% cold rolled NbMoV and V single microalloyed low carbon steels during intercritical annealing. The microstructure and precipitation behaviour were studied by optical and scanning/transmission electron microscopy and microanalysis, X-ray diffraction technique and Vickers hardness testing. After intercritical a...

fept nanoparticles with thermally stable room-temperature ferromagnetism are investigated. the monodisperse nanoparticles are prepared by chemical synthesis and a salt-matrix annealing technique. structural and magnetic characterizations confirm the phase transition from the disordered face-centered cubic structure. in this paper, 3 nm fept nanoparticles are first synthesized by superhydride re...

Twinning induced plasticity (TWIP) steels with high manganese percentage (17-35%), are mostly used in automotive bodies. Their microstructure at room temperature is austenitic, and due to the low stacking fault energy, major deformation mechanism in them is twinning inside austenite grains which leads to enhanced mechanical strength in the steel. Due to the important effect of heat treatment pr...

Simulated Annealing is a family of randomized algorithms used to solve many combinatorial optimization problems. In practice they have been applied to solve some presumably hard (e.g., NP-complete) problems. The level of performance obtained has been promising [5, 2, 6, 14]. The success of this heuristic technique has motivated analysis of this algorithm from a theoretical point of view. In par...

Effects of annealing treatment after equal channel angular pressing (ECAP) on the interface properties and shear bond strength of Al/Cu bimetallic rods were investigated. For the as-deformed samples, the one with two passes of ECAP indicated higher shear bond strength. Formation of a layer of intermetallic compounds after annealing treatment is confirmed. In general, by increasing annealing tem...

In this paper a new approach is proposed for the adaptation of the simulated annealing search in the field of the Multi-Objective Optimization (MOO). This new approach is called Multi-Case Multi-Objective Simulated Annealing (MC-MOSA). It uses some basics of a well-known recent Multi-Objective Simulated Annealing proposed by Ulungu et al., which is referred in the literature as U-MOSA. However,...