In the hot compression test friction has a detrimental influence on the flow stress through the process and therefore, correcting the deformation curve for real behavior is very important for both researchers and engineers. In this study, a series of compression tests were simulated using Abaqus software. In this study, it has been employed the Taguchi method to design experiments by the factor...

In this paper, the plastic limit load of cylindrical shells with opening subject to combined bending moment and axial force are found by finite element method using ANSYS suite of program. The effect of various parameters such as the geometrical ratios of shell and the shape, size, axial and angular position of the opening on the limit load of cylindrical shells under various loading conditions...

BACKGROUND In the United States, major compression and burst type fractures (>20% height loss) of the lumbar spine occur as a result of motor vehicle crashes, despite the improvements in restraint technologies. Lumbar burst fractures typically require an axial compressive load and have been known to occur during a non-horizontal crash event that involve high vertical components of loading. Rece...

in this paper it is attempted to investigate the behavior of an inviscid flow in the meridional plane of an axial flow compressor. for this purpose the 3-d unsteady euler equations in cylindrical coordinate are averaged in tangential direction. therefore, the equations are reduced to a 2-d system. by averaging the tangential component of momentum equation, a blade force will result. axial and r...

Article history: Received 26 February 2013 Received in revised form 19 July 2013 Available online 17 August 2013 Dedicated to Prof. S. Kyriakides on the occasion of his 60th birthday.

This paper presents a numerical study on the vertical (axial) and lateral (flexure) behavior of CFST (Concrete-Filled Steel Tube) columns with active hoop prestress achieved by bolting together two steel half-tubes. Twelve prototype column specimens differing in prestressing force (three levels) gravity loading ratio (four are analyzed; they selected to represent typical ground mid-rise buildin...

According to the wide application of segmental lining in mechanized tunneling, recognizing the behavior of segmental lining joints is important in tunnels designing. In the structural analysis of the tunnel segmental lining, segmental joints can be considered as elastic joints, and their stiffness characteristics are affected by the rotational, shear, and axial stiffness. The purpose of this wo...

Abstract The concrete open-web sandwich slab is composed of the vierendeel girders intersecting each other. girder are upper rib, lower rib and shear key. mainly bear axial force, keys force. A double scalar elastic damage constitutive model considering was derived to accurately simulate mechanical property key in which one reflected volume damage, other damage. study, uniaxial tension compress...

Axial vibration effect of shell particles on dynamic stability of a cantilevered cylindrical shell under an axial follower force was addressed. In spite of free-ended shells, the reduced axial force under this effect cannot be derived analytically. Instead, an approximate method was proposed based on the fact that the static (and harmonic) axial deformation under an axial load in a free-ended b...