Abstract: This article aims to study the effects of shock-disturbed cracks on the cutting features of cone bits. By utilizing the Walsh’s model, a crack model was established for the damaged rock surrounding the induced hole, the intrusive coefficient of the cone bit was derived, and the drilling rate equation around the induced hole was formulated. The effects of crack density and disturbance ...

Recently my attention has been drawn to the above-mentioned article in which Dr. Qizhi employed the so-called section method for deriving an approximate analytical expression for the SIF for a penny-shaped crack in an inf'mitely long cylinder subjected to uniform axial load. The method is widely used in problems of structural mechanics. Probably Parton and Morozov first employed this method in ...

In this study, the problem of finding the limiting load in infinite plates with internal cracks is extended to the non-linear field. In particular, results concerning concrete plates in bi-axial loading are shown. The analysis is performed in discrete form, by means of the Cell Method. The discrete analysis allows us to identify the crack initiation without using the stress intensity factors. T...

This work explores multiaxial stress effects on fatigue crack nucleation and growth in filled natural rubber based on experiments using short thin-walled cylindrical specimens subjected to axial and twist displacements. Cyclic stress–strain response exhibits significant initial softening relative to the monotonic response, followed by a more gradual additional softening. Irreversible breakage o...

It is necessary to manage the fatigue crack growth (FCG) once those cracks are detected during in-service inspections. In this paper, a simulation program (FCG-System) is developed utilizing the commercial software ABAQUS with its object-oriented programming interface to simulate the fatigue crack path and to compute the corresponding fatigue life. In order to apply FCG-System in large-scale ma...

Polymethylmethacrylate (PMMA) bone cement is a polymeric material that is widely used as a structural orthopedic material. However, it is not an ideal material for bone grafting due to its fragility. Carbon nanotubes (CNTs) have been introduced in order to reinforce PMMA resulting in a composite material which exhibits improved tensile properties, increased fatigue resistance and fracture tough...

Mode I steady crack growth was analyzed to determine the toughening due to domain switching in ferroelectric ceramics. A multi-axial, electromechanically coupled, incremental constitutive theory is applied to model the material behavior of the ferroelectric ceramic. The constitutive law is then implemented within the finite element method to study steady crack growth. The effects of mechanical ...

Multi-axial fatigue life assessment is important in power generation, aerospace, automotive, and many other industries. The newly developed path-dependent multi-axial cycle counting and fatigue life assessment method has been shown effective for some applications. For instance, when stress range is used as the only driving force for fatigue failure, the method correlates high cycle fatigue test...

Molecular dynamics (MD) simulations are used to directly observe nucleation of median cracks in oxide glasses under indentation. Indenters with sharp angles can nucleate median cracks in samples with no pre-existing flaws, while indenters with larger indenter angles cannot. Increasing the tip radius increases the critical load for nucleation of the median crack. Based upon an independent set of...

Mode I steady crack growth is analyzed to determine the toughening due to domain switching in ferroelectric ceramics with electric field applied parallel to the crack front. A multi-axial, electromechanically coupled, incremental constitutive theory is applied to model the material behavior of the ferroelectric ceramic. The constitutive law is then implemented within the finite element method t...