The aim of this investigation was to study the relationship between activation factors and adsorption of cationic dye, methylene blue MB, by activated bentonite. The adsorption index was investigated as a function of acid type, time and temperature. A commercial bentonite was selected as a starting material and the effect of heat treatment on MB adsorption were determined in a batch setup. Thou...

The objective of this study was to investigate the biosorption of an azo dye (Methylene blue) by a wetland phytomass (Typha angustata) under post-phytoremediation scenario. Thus, the phytomass was used without any chemical modification. The batch adsorption experiments were conducted to evaluate the effects of contact time and temperatures (25–45 C) on the adsorption of methylene blue (MB) from...

Activated carbon was prepared from Enteromorpha prolifera by zinc chloride activation. The adsorption behaviors of three reactive dyes (Reactive Red 23, Reactive Blue 171 and Reactive Blue 4) onto this biomass activated carbon were investigated in batch systems. The experimental findings showed that the removal efficiencies of three dyes onto activated carbon were maximum at the initial solutio...

In this study, the adsorption of certain water-soluble cationic dyes, (basic blue 9, basic blue 12, basic blue 17, brilliant cresyl blue, janus green B, basic green 4, basic violet 1, basic violet 3, and thionin) onto TriSyl silicas by batch adsorption at 25◦C was investigated. In the adsorption experiments, Langmuir type adsorption in the Giles classification system was found. Binding paramete...

Cobalt silicate precipitation tube (CoSPT), prepared through ‘silica garden’ route was found to be a potential adsorbent for removal of cadmium from aqueous medium. Detail adsorption study of Cd(II) on CoSPT was investigated. Batch adsorption studies were carried out as a function of contact time, adsorbent dose, adsorbate concentration (50-300 mg L-1), temperature (298-323K). Cd(II) loading on...

Batch sorption studies have been carried out to determine the effect of initial concentration of the sorbate, agitation time, adsorbent dose, pH, co-ions and temperature on the adsorption of fluoride on activated carbon prepared from newspaper. The adsorption process was found to be pH, temperature and concentration dependent. The experimental data fitted well to the Freundlich and Langmuir iso...

[1] In the 300 Area of a U(VI)-contaminated aquifer at Hanford, Washington, USA, inorganic carbon and major cations, which have large impacts on U(VI) transport, change on an hourly and seasonal basis near the Columbia River. Batch and column experiments were conducted to investigate the factors controlling U(VI) adsorption/desorption by changing chemical conditions over time. Low alkalinity an...

In this study, nano-TiO2 was employed for the adsorption of chloroform from aqueous solution in batch equilibrium experiments to investigate its adsorption properties. The effects of pH, initial chloroform concentration and nano-TiO2 dosage were also investigated. Optimal conditions for chloroform removal by nano-TiO2 have been then identified. Results of equilibrium experiments showed that the...

In this research, the batch removal of toxic hexavalent chromium ions from wastewater and aqueous solution using dried (BD) Sargassum sp. (brown marine algae) and Activated Carbon (AC) prepared from it was examined. Biomass, pH and the initial concentration of Cr(VI), adsorption models and kinetic studies were investigated. The experiment was performed in a batch system and theeffe...

BACKGROUND: Aluminum has recently been recognized as a causative agent in dialysis encephalopathy, osteodystrophy, and microcytic anemia occurring in patients with chronic renal failure who undergo long-term hemodialysis. Only a small amount of Al(III) in dialysis solutions may give rise to these disorders. METHODS: Magnetic poly(2-hydroxyethyl methacrylate) (mPHEMA) beads in the size range of ...