in this work, old newspaper fibers (onf) bleached with h2o2, treated with koh and treated with naocl were investigated as potential adsorbents. the characterization of the produced fibers using ft-ir, sem and particle size distribution have been carried out and tested for the removal of ni (ii) from aqueous solutions. the results indicated that the fibers treated with koh give the highest %remo...

The adsorption potential of clay and sandy soil to remove benzene from liquid-phase system was examined. A series of batch adsorption tests were carried out for various concentrations of benzene (50 250 mg/l) in tightly corked 1000 ml flasks for clay and sandy soil, respectively. Equilibrium and kinetics data were obtained from the batch experiments. Adsorption increased with increasing initial...

A series of batch and column laboratory experiments were conducted to determine adsorption coefficients of mercury (II) for Oak Ridge Reservation (ORR) soil. The experimental setup used soil collected from an area offsite of the ORR, in a location upstream of East Fork Poplar Creek (EFPC). The batch equilibrium experiments were conducted in the range of 600 to 5,000 μg/L of initial Hg(II) conce...

Heavy metals are widely used in textile industries and significant losses occur during the manufacture and processing of textiles, and these lost heavy metals are discharged in the effluent. Adsorption of heavy metals is a new technology for treatment of wastewater containing different types of selected heavy metals. In this study, adsorbents Carbonized Rice Husk (CRH) and Activated Rice Husk (...

Ala~ntct--Tbe performance characteristics of two activated carbons and eight synthetic adsorbents are compared. The comparison addresses both the equilibrium capacities and mass transport properties of the adsorbents. A new empirical adsorption isotherm is employed for description of adsorption equilibrium data. A' predictive mathematical model is used for forecasting adsorption bed performance...

ginger waste material (gwm) has been utilized as adsorbent for removal of hazardouspatent blue vf (pbvf) dye from aqueous solution. batch adsorption experiments wereperformed as a function of ph, contact time, dye concentration, adsorbent dose and temperature.the optimum ph required for the maximum adsorption was found to be 2. the experimentalequilibrium adsorption data were tested using langm...

jute modified has been used for adsorption of cr (vi), cd (ii) and pb (ii) ions over a range ofinitial metal ion concentration. adsorption process is done in batch mode. adsorption isotherms ofthe heavy metals on adsorbents prepared were determined and correlated with common isothermequations. it was found that the freundlich isotherm is better than langmuir for explaining thebehavior of adsorp...

Carbon slurry, dried in open air, has been used as an adsorbent material for the removal of nickel(II) from aqueous solutions at different experimental conditions in batch adsorption technique. The time required to attain equilibrium was found to be 50 minutes. The effects of initial concentration of Ni(II), particle size of adsorbent, adsorbent dose, temperature and pH on removal of nickel(II)...

A new medium, eggshell powder has been developed for fluoride removal from aqueous solution. Fluoride adsorption was studied in a batch system where adsorption was found to be pH dependent with maximum removal efficiency at 6.0. The experimental data was more satisfactorily fitted with Langmuir isotherm model. The kinetics and the factor controlling adsorption process fully accepted by pseudo-s...

In the present study, a hydrophobic zeolite was used as an adsorbent for the adsorption of polyethylene glycol (PEG) in water solution and electroplating solution at 25 degrees C. The adsorption capacities were determined through the adsorption isotherms in a thermostated shaker. The rate of adsorption, on the other hand, was investigated in a batch adsorber under controlled process parameters ...