We present a new method for calibrating an optical-tweezer setup that does not depend on input parameters and is less affected by systematic errors like drift of the setup. It is based on an inference approach that uses Bayesian probability to infer the diffusion coefficient and the potential felt by a bead trapped in an optical or magnetic trap. It exploits a much larger amount of the informat...

An analytical expression relating mass and position of a particle attached on a cantilever to the resulting change in cantilever resonant frequency is derived. Theoretically, the position and mass of the attached particle can be deduced by combining measured resonant frequencies of several bending modes. This finding is verified experimentally using a microscale cantilever with and without an a...

Magnetic domain walls in ferromagnetic tracks can be used to trap and transport superparamagnetic beads for lab-on-a-chip applications. Here it is shown that the magnetostatic binding between a domain wall and a superparamagnetic bead suspended in a host fluid leads to a distinct magneto-mechanical resonance under application of a sinusoidal driving field. The characteristic resonant frequency ...

We demonstrate a new method for measuring the sedimentation of a single colloidal bead by using a combination of optical tweezers and a stereo microscope based on a spatial light modulator. We use optical tweezers to raise a micron-sized silica bead to a fixed height and then release it to observe its 3D motion while it sediments under gravity. This experimental procedure provides two independe...

Sephacryl beads containing an immobilized aminopropylcobalamin-transcobalamin-II complex serve as foci for the adherence of L1210 murine leukemia cells. Bead-cell interaction does not occur when (A) nonderivatized beads are used; (B) transcobalamin-II is omitted or presaturated with cyanocobalamin in the preparation of the bead complex; (C) intrinsic factor replaces transcobalamin-II; and (D) t...

Maintaining effective solids capture and nitrification can determine the success or failure of a recirculating aquaculture system (RAS). Although solids capture and nitrification are often performed sequentially, they are united in floating-bead filters. The use of bead filters in a RAS began at the Dworshak National Fish Hatchery (Cooley 1979). More recently, a bead filter was developed and te...

This paper investigates the effects of process parameters on weld bead width of austenitic stainless steel SS-310 in tungsten inert gas welding. The four parameters namely welding current, type of gas, gas flow rate and included angle of weld plates during butt joint were varied at three levels. The DOE approach was used to design experimental conditions. Orthogonal array L9 was used for carryi...