abstract background and aim: one of the major problems with resin composite restorations is the weakness of bonding between the new and aged composites. since appropriate micromechanical retention is necessary for the repair of aged resin composite restorations, the level of surface roughness after sandblasting can be influential in this regard. considering the diverse composition of available ...

The relationships between the transmission coefficient and the cure depth were evaluated on eight commercially available light-activated resin composites. The determination of transmission coefficient was carried out by the use of a radiometer for various shades of the resin composites. The transmission coefficient, ranging from 0.042 to 0.263, wasdependent upon the shade of the resin. There wa...

STATEMENT OF PROBLEM Resin composites are brittle materials and their major shortcomings are manifested in their sensitivity to flaws and defects. Although various mechanical properties of resin composites have been described, few studies are available on assessing the effect of bleaching agents on resin composites using the short rod design. PURPOSE To place various resin composites into dis...

Improving the anti-demineralizing/remineralizing and mechanical properties of amorphous calcium phosphate (ACP) composites has been the focus of our recent research. In this study, an ethoxylated bisphenol A dimethacrylate (EBPADMA) was blended with triethylene glycol dimethacrylate (TEGDMA), 2-hydroxyethyl methacrylate (HEMA) and methacryloxyethyl phthalate (MEP) to form experimental resins wi...

OBJECTIVE To evaluate the translucency characteristics of new flowable bulk-filling resin composites at various thicknesses. Experimental short fibre-reinforced composite was also tested. METHODS Two new brands of flowable bulk composites (Venus Bulk Fill and SureFil SDR Flow), experimental short fibre-reinforced resin composite (FC) and, as control, conventional flow (Filtek Supreme Flow XT ...

OBJECTIVE This study compared the color changes of five novel resin composites polished with two one-step polishing systems when exposed to coffee solution. METHODS The resin composites tested were Filtek Supreme XT, Grandio, CeramX, Premise and Tetric EvoCeram. A total of 150 discs (30/resin composites, 10 x 2 mm) were fabricated. Ten specimens/resin composites cured under Mylar strips serve...

The purpose of this study was to evaluate the effect of thermal cycling on the surface texture of restorative materials. Disk-shaped specimens made of seven resin composites (Beautifil: BF; Esthet-X: EX; Filtek Supreme: FS; Inten-S: IS; Point 4: PT; Solare: SR; and Venus: VS) were finished with 1-microm alumina suspension, and then thermocycled between 4 and 60 degrees C in distilled water for ...

This study aimed to evaluate the effectiveness of various intermediate layers on the microleakage of Class V restorations under an occlusal load. Wedge-shaped cavities were prepared on the buccal surface of 72 extracted premolars, which were then treated with an adhesive system (One Up Bond F Plus), divided into three groups, and restored with: 1) Estelite Sigma resin composite, 2) a resin comp...

blown bitumen (110/10) was mixed with heavy vacuum slops (h.v.s), 60/70 penetration grade bitumen and recycled isotactic polypropylene (ipp) at different levels. the resulting resins were used to impregnate non-woven poly(ethylene terephthalate) fibers to form composites. the modulus and penetration grade of the resulting bituminous resins were determined. it was found that these bituminous res...