Steel plates in double skin composite (DSC) panels are restrained by a concrete core and welded stud shear connectors at discrete positions. Local buckling of steel plates in DSC panels may occur in a unilateral mode between stud shear connectors when subjected to combined states of stresses. This paper studies the local and post-local buckling strength of steel plates in DSC panels under biaxi...

Laminar structures have a high post-buckling strength reserve. Cold-formed steel profiles can be taken as a set of thin plate elements. Therefore it is necessary to design this type of profiles taking into account that reserve of strength in post-local buckling modes of failure. The method normally used to design this type of structures is based on the Effective Width concept. The Effective Wid...

An approach to obtain analytical closed-form expressions for the macroscopic 'buckling strength' of various two-dimensional cellular structures is presented. The method is based on classical beam-column end-moment behaviour expressed in a matrix form. It is applied to sample honeycombs with square, triangular and hexagonal unit cells to determine their buckling strength under a general macrosco...

Pyramidal truss sandwich cores with relative densities 4q in the range 1–10% have been made from carbon fiber reinforced polymer laminates using a snap-fitting method. The measured quasi-static uniaxial compressive strength increased with increasing 4q from 1 to 11 MPa over the relative density range investigated here. A robust face-sheet/ truss joint design was developed to suppress truss– fac...

The buckling of compressively-loaded members is one of the most important factors limiting the overall strength and stability of a structure. I have developed novel techniques for using active control to wiggle a structural element in such a way that buckling is prevented. I present the results of analysis, simulation, and experimentation to show that buckling can be prevented through computer-...

An analytical investigation is conducted to predict the post-buckling strength of laminated composite stiffened panels under compressive loads. When a stiffened composite panel buckles, the skin would deform into a sinusoidal mode shape, and hence induces additional moments and forces near the skin-stiffener interface region. These induced loads would cause the existing small edge delamination ...

The problem of buckling stability is very important in thin-walled cylindrical shell structure. In order to investigate the buckling phenomena, digital image correlation (DIC) method was applied in this experiment. The specimens have a thickness of 0.131mm and the ratio of external diameter (R0) to thickness (H) R0/H is 252. Due to its curved and thin walled elements, measurement of displacemen...

a comparison between design codes i.e. aci and aisc-lrfd in evaluation of flexural strength of concrete filled steel tubular columns (cfts) is examined. for this purpose an analytical study on the response of cfts under axial-flexural loading is carried using three-dimensional finite elements with elasto-plastic model for concrete with cracking and crushing capability and elastoplastic kinemati...