Abstract. A PDE system consisting of the momentum balance, mass balance, and energy balance equations for displacement, capillary pressure, and temperature as a model for unsaturated fluid flow in a porous viscoelastoplastic solid is shown to admit a solution under appropriate assumptions on the constitutive behavior. The problem involves two hysteresis operators accounting for plastic and capi...

We examine the effects of capillarity and gravity in a model of one-dimensional imbibition of an incompressible liquid into a deformable porous material. We focus primarily on a capillary rise problem but also discuss a capillary/gravitational drainage configuration in which capillary and gravity forces act in the same direction. Models in both cases can be formulated as nonlinear free-boundary...

A solid tumor is investigated as porous media for fluid flow simulation. Most of the studies use Darcy model for porous media. In Darcy model, the fluid friction is neglected and a few simplified assumptions are implemented. In this study, the effect of these assumptions is studied by considering Brinkman model. A multiscale mathematical method which calculates fluid flow to a solid tumor is us...

This paper presents the design and fabrication of an optical window for an optical modulator toward image sensing applications. An optical window consists of micrometer-order SiO2 capillaries (porous solid) that can modulate transmission light intensity by moving the liquid in and out of porous solid. A high optical transmittance of the optical window can be achieved due to refractive index mat...

Experiments were performed on transparent two-dimensional micro-fluidic porous systems to investigate the relationships among capillary pressure and the interfacial areas per volume among two fluid phases and one solid phase. Capillary pressures were calculated from the observed interfacial curvature of the wetting – non-wetting interface, and these correlated closely to externally measured val...

During the drying of drops of nanoparticle suspensions, segregation can occur by internal fluid flows toward the contact line, if the contact line is pinned. This leads to a characteristic ring deposit or coffee stain. On solid substrates coffee staining can be eliminated through the use of solvent mixtures that promote Marangoni flows to oppose these drying-induced flows. Here it is shown that...

Defining a relation for equilibrium pressure in a porous medium has been difficult to do in terms of readily measurable parameters. We present a simplified analysis of this problem using the first law of thermodynamics combined with a fractal description of a porous system. The results show that the variation in fluid interfacial area with fluid volume, and the respective interfacial surface te...

In this article, liquid moisture transport behaviors of dual-layer electrospun nanofibrous mats are reported for the first time. The dual-layer mats consist of a thick layer of hydrophilic polyacrylonitrile (PAN) nanofibers with a thin layer of hydrophobic polystyrene (PS) nanofibers with and without interpenetrating nanopores, respectively. The mats are coated with polydopamine (PDOPA) to diff...

We study the elastic properties of soft solids containing air bubbles. Contrary to standard porous materials, the softness of the matrix allows for a coupling of the matrix elasticity to surface tension forces acting on the bubble surface. Thanks to appropriate experiments on model systems, we demonstrate how the elastic response of the soft porous solid is governed by two dimensionless paramet...

We present a stable numerical scheme for modelling multiphase flow in porous media, where the characteristic size of the flow domain is of the order of microns to millimetres. The numerical method is developed for efficient modelling of multiphase flow in porous media with complex interface motion and irregular solid boundaries. The Navier–Stokes equations are discretised using a finite volume ...