Oat and wheat straw are abundant yet at the same time are not widely used. For this reason they were tested as metal ion removers from water solutions. Batch experiments were done to determine the affinity of both biomasses for Cu(II), Pb(II), Cr(III), Cr(VI), Ni(II), Zn(II), and Cd(II) metal ions at several pHs; times of reaction and the adsorption capacity for each metal were determined under...

This study investigates the interactions between dissolved trace metals and plastic debris under controlled laboratory conditions by using polyethylene pellets as a model plastic particle. Specifically, the study compared virgin pellets sourced from a local moulding plant with those collected from local beaches and subjected to aging, attrition and deposition of extraneous material. Pellets col...

the removal of cd2+ and pb2+ ions from wastewater using p-tert-butyl-calix[4] arene was investigated in terms of initial ph, initial concentration, adsorbent dosage, contact time and temperature. the maximum adsorption occurred at the ph value of 6. the adsorbent studied exhibits high efficiency for cd (ii)and pb (ii) adsorption and the equilibrium states could be achieved in 10 min. adsorption...

In this study, the adsorption behavior of zeolites A and X, which are prepared from very cheap local Egyptian clay (kaolin), with respect to Cu(2+), Cd(+2), Cr(+2), Ni(+2) and Zn(2+) has been studied. The batch method has been employed, using metal solutions ranging from 100 to 400 mg/L. The distribution coefficients (K(d)) and adsorption percent were determined for the adsorption system as a f...

In this work, we analyze artificial heavy-metal solutions with ferrite nanoparticles. Measurements of adsorption effectiveness of different kinds of particles, pure magnetite or magnetite doped with calcium, cobalt, manganese, or nickel ions, were carried out. A dependence of the adsorption efficiency on the composition of the inorganic core has been observed. Ferrites surfaces were modified by...

This work reports the sol-gel synthesis of a SBA-15 silica, and its functionalization with 4-amino-2-mercaptopyrimidine to perform adsorption of metal species from aqueous media. The functionalization of the material was confirmed by FTIR and superficial area measurements. The final material was tested through batch experiments to uncover its adsorptive properties towards the adsorption of Cu(I...

The adsorption capacity of hebba clay and activated carbon towards (Fe 3+ , Cu 2+ , Zn 2+ , Pb 2+ , Cr 3+ , Cd 2+ ) metal ions was studied. The adsorption capacity was investigated by batch experiment. The effect of weight of hebba was studied and the results showed that the removal percentages increased as the weight of sorbent increased. The effect of contact time was also studied and the res...

Heavy metals are serious pollutants in aquatic environments. A study was undertaken to remove Cu, Cd, Ni, Pb and Zn individually (single metal system) and together (mixed metals system) from water by adsorption onto a sodium titanate nanofibrous material. Langmuir adsorption capacities (mg/g) at 10(-3)M NaNO3 ionic strength in the single metal system were 60, 83, 115 and 149 for Ni, Zn, Cu, and...

Abstract Woody agricultural wastes have created enormous pressure on the environment. In this study, mulberry and cinnamon woodchips were reclaimed prepared for biochars through pyrolysis technique at four different temperatures. Physicochemical properties showed that biochar exhibited higher pH, CEC ash content than each temperature. All utilized as adsorbents to remove cadmium (Cd) atrazine (...

The presence of heavy metals in the environment constitutes a potential source of both soil and groundwater pollution. This study has focused on the reactivity of lead (Pb), copper (Cu) and Cadmium (Cd) during their transfer in a calcareous soil of Port-au-Prince (Haiti). Kinetic, monometal and competitive batch tests were carried out at pH 6.0. Two simplified models including pseudo-first-orde...