PURPOSE The purpose of this study was to evaluate and compare the effects of different surface pretreatment techniques on the surface roughness and shear bond strength of a new self-adhering flowable composite resin for use with lithium disilicate-reinforced CAD/CAM ceramic material. MATERIALS AND METHODS A total of one hundred thirty lithium disilicate CAD/CAM ceramic plates with dimensions ...

The connection of ceramics and metals together can combine the high wear resistance corrosion ductility toughness to form structural parts with metallic non-metallic properties, practical application value ceramic/metal composite is much greater than that or as individual materials. Due large difference between coefficient thermal expansion metals, residual stresses generated during will damage...

 Background: This research studied the feasibility of a simple method for extracting gold from central processing units (CPUs) of computer circuit boards without solvent. Methods: Ceramic and composite CPUs of computer circuit boards were used. Gold was extracted using a hydrometallurgical method in six stages: grinding of CPUs, leaching in nitric acid, leaching in aqua regia, remov...

The development of composite materials that are simultaneously strong and tough is one of the most active topics of current material science. Observations of biological structural materials show that adequate introduction of reinforcements and interfaces, or interphases, at different scales usually improves toughness, without reduction in strength. The prospect of interphase properties tuning m...

OBJECTIVES The aim of this study was to evaluate the effect of different surface treatments on the microtensile bond strength between a leucite reinforced glass-ceramic and composite resin. METHODS Leucite reinforced ceramic blocks (n=24) were constructed using the hot pressing technique. The blocks were assigned to 4 groups, which received the following surface treatments: G1: hydrofluoric (...

Plasma electrolytic oxidation (PEO) is a potential technique to coat a dense ceramic oxide layer on the surface of light metals, e.g. Al, Mg or Ti. In our PEO process, Al-pieces are emerged in aqueous solutions containing dissolved silicate/alkali, e.g. KOH/NaOH and K 2 SiO 3 /Na 2 SiO 3. Using a DC-pulsed system with 20Hz, micro-arcs are induced at the surface of the pieces randomly and plasma...

Chemical incompatibility and low thermal conductivity issues of molten-salt-based thermal energy storage materials can be addressed by using microstructured composites. Using a eutectic mixture of lithium and sodium carbonates as molten salt, magnesium oxide as supporting material, and graphite as thermal conductivity enhancer, the microstructural development, chemical compatibility, thermal st...

Fiber-reinforced composite resin (FRC) prostheses offer the advantages of good aesthetics, minimal invasive treatment, and an ability to bond to the abutment teeth, thereby compensating for less-than-optimal abutment tooth retention and resistance form. These prostheses are composed of two types of composite materials: fiber composites to build the framework and hybrid or microfill particulate ...