Ceramics have excellent mechanical properties and very stable wear characteristics and therefore have been used in many industries including automotives, aeronautics and healthcare. The use of ceramics in total hip arthroplasty has been increasing. This review article we will provide an overview of where we started and how far we have come. We will review the mechanical properties of ceramics, ...

the present investigation attempted to develop the ceramic adsorbent media in order to remove the mercury from aqueous phase. two ceramics, akadama volcanic ash soil-ceramic (aceramic) and improved magnesium oxide impregnated akadama volcanic ash soil-ceramic (maceramic) were produced from raw akadama volcanic ash soil by heating process to determine the hg(ii) adsorption capacity. adsorption e...

The microstructure and physical properties of new Y2O3 and Al2O3 oxide-doped silicon nitride ceramics fabricated by cold isostatic pressing and free sintering were investigated. The phase composition of produced material was also studied by X-ray diffraction at room and elevated temperature. The fabricated ceramics featured a microstructure of Si5AlON7 grains with a fine-grained α-Si3N4 with a ...

This chapter describes the application of the RAP/AOR methodology proposed by Taveter and Wagner (2005, 2006) to the modeling and simulation of a real ceramics factory. The chapter addresses the modeling of the ceramics factory from the interaction, information, and behavior aspects of the methodology. The chapter also discusses the simulation of the manufacturing processes of the ceramics fact...

In this article, the separation between reversible and irreversible polarization where the reversible polarization component is determined by capacitance–voltage curve measurements, is used to characterize ferroelectric materials. After giving a thorough foundation of the method, it is used to investigate the influence of the composition on the reversible and irreversible polarization contribut...

Simple relations for the onset of competing brittle and quasiplastic damage modes in Hertzian contact are presented. The formulations are expressed in terms of well-documented material parameters, elastic modulus, toughness, and hardness, enabling a priori predictions for given ceramics and indenter radii. Data from a range of selected ceramic (and other) materials are used to demonstrate the a...

Abstract:Some types of glass and glass ceramics have a great potential for making bone tissue engineering scaffolds, drug carrier and bone cements as they can bond to host bone, stimulate bone cells toward osteogenesis, and resorb at the same time as the bone is repaired. Calcium phosphate glass ceramics have very attractive properties that allow them to use in bone tissue engineering. Calcium ...

Er(3+)-doped transparent glass ceramics containing micron-sized SrF2 crystals were obtained by direct liquid-phase sintering of a mixture of SrF2 powders and precursor glass powders at 820 °C for 15 min. The appearance and microstructural evolution of the SrF2 crystals in the resulting glass ceramics were investigated using X-ray diffraction, field-emission scanning electron microscopy and tran...

Glasses and glass-ceramics (GCs) used for sealing, coating and high voltage applications belong to a special class of materials in which among other requirements, matching of thermal expansion coefficient with that of metal as closely as possible up to set temperature is an important consideration. In this paper I shall concentrate on some indigenous efforts carried out in my laboratory on the ...

This study investigated the influence of ceramic compositions on Knoop Hardness Number (KHN) immediately and 24 h after polymerization and the effect of activation modes on the KHN of a resin cement. Ten Panavia F 2.0 resin cement discs were activated either directly using curing light, or chemically without light, or through 1.2-thick ceramic discs. The following ceramics were evaluated: Ducer...