OBJECTIVES To determine the static load-bearing capacity of direct composite onlay restorations made of novel filling composite resin system which combines short fiber-reinforced composite resin (FC) and conventional particulate filler composite resin (PFC). METHODS Three groups of onlay restorations were fabricated (n = 8/group); Group A: made from conventional particulate filler composite r...

The aim of this study is experimental assay of sensitivity and stability of a bimetallic silver/gold SPR sensor chip. This chip utilizes the sensitivity of the silver and the stability of the gold. Moreover, the Silver layer (instead of usual Cr or Ti layer) was used as an adhesive intermediate layer between the Gold layer and the glass substrate. The optimization of the Gold/Silver thickness u...

Mechanical property and impact resistance mechanism of bionic layered composite was investigated. Due to light weight and high strength property, white clam shell was chosen as bionic model for design of bionic layered composite. The intercoupling model between hard layer and soft layer was identical to the layered microstructure and hardness tendency of the white clam shell, which connected th...

OBJECTIVE The aim of this study was to evaluate the effect of multiple layers of an infection control barrier on the micro-hardness of a composite resin. MATERIAL AND METHODS One, two, four, and eight layers of an infection control barrier were used to cover the light guides of a high-power light emitting diode (LeD) light curing unit (LCU) and a low-power halogen LCU. The composite specimens...

a palladium composite membrane was prepared by electroless plating on oxidized porous stainless steel support (ox-pss). hydrogen permeation flux through this composite membrane was measured in the temperature range of 574-674k and the pressure difference of two sides of membrane up to 90kpa. a simplified resistance model was employed to analyze the permeation behavior of hydrogen through pd/ox-...

design of bridge deck with long-term strength, durability and permanence is a significant interest for engineers. one applicable solution to this challenge could be via using hybrid system consisting of conventional materials such as concrete and steel with frp plates which is also known as composite deck. since these deck are relatively new so their performance is not completely known. the pre...

OBJECTIVES The aim of this finite elemental stress analysis study was to evaluate the effect of cavity shape and hybrid layer on the stress distribution of the mandibular premolar tooth under occlusal loading. METHODS The mandibular premolar tooth was selected as the model based on the anatomical measurements suggested by Wheeler. Four different mathematical models were evaluated: 1) a saucer...

Bombyx mori cocoon is a natural composite made of silk fibre with a distinctive multi-layer structure that provides mechanical protection for its biological functions. Here we investigate the components, structure and mechanical properties of cocoon layers, and quantify the contributions of the multi-layer structure to the mechanical properties of cocoon. A better understanding of the multi-lay...

background and aims. adhesive permeability is hindered by application of an additional layer of hydrophobic resin, which increases its concentration within the hydrophilic layer, reduces its affinity to water, and enhances its physical properties. the aim of the present study was to evaluate the effect of a hydrophobic layer on the microleakage of class v composite restorations using different ...