Metal hydride applications span a wide variety of tech! nologies\ e[g[\ energy conversion\ chemical compressors and hydrogen storage[ A knowledge of heat and mass transfer in a metal hydride reactor during the absorption and desorption of hydrogen is important for performance optimization of the reactor[ One of the key requirements in the design of metal hydride bed is the enhancement of the e}...

This study presents an optimization problem for shape design of a 2-D radiant enclosure with transparent medium and gray-diffuse surfaces. The aim of the design problem is to find the optimum geometry of a radiant enclosure from the knowledge of temperature and heat flux over some parts of boundary surface, namely the design surface. The solution of radiative heat transfer is based on the net r...

the present work is an experimental study of steady state convective heat transfer of de-ionized water with a (0.04% by volume) volume fraction of al2o3 nanoparticles dispersed to form a nanofluid that flows through an aluminium tube.laminar fully developed flow heat transfer coefficient of al2o3 nanoparticles are dispersed in water in circular tube is discussed in this paper. in order to valid...

the presence of particles in liquid-solid fluidized beds enhances the bed heat transfer, because the movement of the particles leads to an increased turbulence in the system. moreover, the violent movement of the particles has a positive effect on fouling of the heat transfer surface. the aim of this investigation was to perform systematic measurements of bed voidage and heat transfer coefficie...

This paper analyzes stability and convergence properties of a conjugate heat transfer problem in one space dimension. The energy method is used to derive boundary and interface conditions and to prove that the semi-discrete problem is stable. The numerical scheme is implemented using 2nd-, 3rdand 4th-order finite difference operators on Summation-By-Parts (SBP) form. The boundary and interface ...

in this paper, the conjugate gradient method coupled with adjoint problem is used in order to solve the inverse heat conduction problem and estimation of the time- dependent heat flux using the temperature distribution at a point in a three layer system with none homogeneous boundary conditions. also, the effect of noisy data on final solution is studied. for solving this problem the general co...

In most cases authors are permitted to post their version of the article (e.g. in Word or Tex form) to their personal website or institutional repository. Authors requiring further information regarding Elsevier's archiving and manuscript policies are encouraged to visit: a b s t r a c t In this paper, a hybrid boundary element method (BEM) — radial basis integral equation (RBIE) method is deri...

Using of nanofluids and ducts with corrugated walls are both supposed to enhance heat transfer, by increasing the heat transfer fluid conductivity and the heat transfer area respectively. Use of a diverging duct with a jet at inlet section may further increase heat transfer by creating recirculation zones inside the duct. In this work two-dimensional incompressible laminar flow of a nanofluid e...

the present experimental study reports on enhancement of heat transfer by addition of nanoparticles to the working fluid of commercial swimming pool heat exchangers under laminar flow condition. three different concentrations of titanium dioxide nanoparticles were added to the water as working fluid of a typical forced convective heat exchanger used to transfer heat to public swimming pools. th...

Fouling is a common, fundamental and costly problem in heat transfer systems, which reduces thermal efficiency of equipment, increases the energy loss and causes strong damage to the heat transfer equipment in various industries. The main causes of fouling on the heat transfer surfaces are salts with inverse temperature-solubility in the fluid which calcium sulfate is one of the most important ...