Mg has been considered a promising biomaterial for bone implants. However, the poor corrosion resistance has become its main undesirable property. In this study, both alloying Mn and laser-melting were applied to enhance the Mg corrosion resistance. The corrosion resistance, mechanical properties, and microstructure of rapid laser-melted Mg-xMn (x = 0-3 wt %) alloys were investigated. The alloy...

In order to improve the corrosion resistance of aluminosilicate refractories by molten aluminum, alkaline fluoride NaF and cryolite Na3AlF6 powders were studied. Both physical and chemical properties are known to influence wetting and corrosion behavior. This paper devoted to determine the influence of alkaline fluoride and cryolite added to andalusite based castable on the reaction with a...

The present work investigates the high temperature oxidation and corrosion behaviour of high entropy superalloys (HESA). A high content of various solutes in HESA leads to formation of complex oxides, however the Cr and Al activities of HESA are sufficient to promote protective chromia or alumina formation on the surface. By comparing the oxidation and corrosion resistances of a Ni-based supera...

Five non-precious Ni-Co based alloys were analyzed with respect to their corrosion behaviour. The correlation between the amount of the elements Cr, Mo, V and the corrosion behaviour, expressed by the PREN (pitting resistance equivalent number) index in the case of the allied steels, was extended for Ni-Cr and Co-Cr dental alloys characterization. Open circuit potential, corrosion current densi...

The oxidation kinetics of two metallic glasses have been studied by ellipsometry and Auger Electron spectroscopy. We have found that the presence of chromium in Fe based alloys has a marked influence on the thickness of corrosion film formed and on the kinetics of film formation. INTRODUCTION measured after various exposures to the high Several authors have reported that amorphous iron based al...

Influence of microstructure on electrochemical behavior of nanocrystalline Fe88Si12 alloy has been investigated in 3.5 wt% NaCl solution. The results show that Fe88Si12 alloy with optimal corrosion resistance is composite of ordered Fe3Si and disordered Fe(Si) phases and grain size of 40 nm. Because the ordered Fe3Si structure is beneficial to form SiO2 film, which possesses good corrosion resi...

Harsh conditions ranging from those of biomedical implants to industrial oilfield applications prompt rapid assessment of whether and to what extent corrosion will occur. Here, we describe and demonstrate a novel high-throughput approach to quantify corrosion susceptibility based upon electrical resistance and colorimetric outputs. We illustrate this capability by quantifying aerobic corrosion ...

Orthodontic mechanotherapy encompasses the use of several archwires during speci c stages of treatment. Metallic orthodontic appliances consist of bands, arch wires, ligature wires, hooks, tubes, brackets, and springs are daily used in orthodontic practices for the correction of malocclusions in patients ( Oh et al. , 2004 ; Verstrynge et al. , 2006 ; Sabane et al. , 2009 ). One of the most im...

The bioactivity and the corrosion protection for a novel nano-grained Ti-20Nb-13Zr at % alloy were examined in a simulated body fluid (SBF). The effect of the SPS's temperature on the corrosion performance was investigated. The phases and microstructural details of the developed alloy were analyzed by XRD (X-ray Diffraction), SEM (Scanning Electron Microscopy), and TEM (Transmission Electron Mi...

Corrosion resistance of pure titanium (Grade 2) and Ti−Pd alloy (Grade 7) was studied using the electrochemical techniques of potentiodynamic measurements and electrochemical impedance spectroscopy (EIS). Measurements were performed at the temperature of 36.6 °C in two solutions: PBS solution with pH of 7.4 simulating conditions of healthy human body, and PBS solution with pH of 5.2 and with th...