In this study, the phase field model of crack propagation is used to study the dynamic branching instability in the case of inplane loading in two dimensions. Simulation results are in good agreement with theoretical predictions and experimental findings. Namely, the critical speed at which the instability starts is about 0.48cs. They also show that a full 3D approach is needed to fully underst...

We have developed an experiment to study the propagation of laboratory synthesized fatigue cracks under various controlled conditions during Sonic IR inspection. The experiment provides for good repeatability in testing. The parameters of interest include the initial crack length, load history (stress intensity and load ratio) during crack generation, geometry of the crack, material and also th...

Continuum mechanics predicts that the propagation speed of non-equilibrium information in solids is limited by the longitudinal wave speed, so is crack propagation. However, solids are essentially discrete systems. In this paper, via theoretical analysis and numerical simulations, it is demonstrated in a straightforward way that nonequilibrium disturbance (e.g. force, displacement, energy, and ...

New generation jet engines are subject to severe reduced fuel consumption requirements. This usually leads to thin components in which damage issues such as thermomechanical fatigue, creep and crack propagation can be quite important. The combination of stresses due to centrifugal loads and thermal stresses usually leads to mixed-mode loading. Consequently, a suitable crack propagation tool mus...

The effects of cryogenic temperature on the toughness of a Zr-based metallic glass are investigated. Based on three-dimensional fracture morphologies at different temperatures, the crack formation and propagation are analyzed. Through the calculation of the shear transformation zone volume, the shear modulus and bulk modulus of the metallic glass at different temperatures and the crack formatio...

Fretting nucleation models and three-dimensional finite element analyses are used to compute the fretting fatigue life for metallic components. The models predict crack nucleation cycles and location(s). Discrete crack growth simulations provide stress intensity factor histories, with multiple, non-planar, three-dimensional cracks possible. The histories are input into crack growth rate model(s...

Cantilever beam is a simplified sample of a lot of mechanical components used in a wide range of applications, including many industries such as gas turbine blade. Due to the nature of the operating conditions, beams are subject to variety of damages especially crack propagates. Crack propagation may lead to catastrophic failure during operation. Therefore, online detection of crack presence an...

The propagation of cracks in graded materials under monotonic and cyclic loading was investigated via experiment and simulation. Graded alumina/epoxy composite specimens exhibiting a variation in composition from 5% to 65% epoxy, representing a twenty-fold variation in Young’s modulus, across a region of width between 6 and 20 mm, were produced by a multistep infiltration technique. Crack initi...

In this work we describe a series of impact experiments performed on PMMA/4340 steel edge cracked bimaterial plates. Specimens were impacted at 20 m SK’ in a one point bend configuration using a high speed gas gun. Dynamic interfacial crack propagation was observed using the optical method of Coherent Gradient Sensing and high speed photography. Very high crack tip accelerations (IO’ m SF’) and...

The filling of strand corrosion products during concrete crack propagation is investigated experimentally in the present paper. The effects of stirrups on the filling of corrosion products and concrete cracking are clarified. A prediction model of crack width is developed incorporating the filling proportion of corrosion products and the twisting shape of the strand. Experimental data on cracki...