with the aim of identifying failure mechanism in oriented strand boards, failure behavior of wood strands under tensile load was investigated using acoustic emission technique. resinated and unresinated strands were arranged at top, middle and bottom section of the board before pressing. tensile and acoustic emission tests were performed simultaneously on treated and control samples. using tens...

Elastic stability of ring and stringer-stiffened cylindrical shells under axial, internal and external pressures is studied using Ritz method. The stiffeners are rings, stringers and their different arrangements at the inner and outer surfaces of the shell. Critical buckling loads are obtained using Ritz method. It has been found that the cylindrical shells with outside rings are more stable th...

The use of composite structures in engineering applications has proliferated over the past few decades. This is mainly due to their distinct advantages of high structural performance, high corrosion resistance, high strength and weight ratio. They are however prone to fiber breakage, matrix cracking and delaminations which are often invisible. Although there are systems to detect such damage, t...

The failure time of samples of heterogeneous materials (wood, fiberglass) is studied as a function of the applied stress. It is shown that in these materials the failure time is predicted with a good accuracy by a model of microcrack nucleation proposed by Pomeau. It is also shown that the crack growth process presents critical features when the failure time is approached. It is very well known...

Mechanical failure is a characteristic of a material or device and not necessarily an indication of inadequacy. All devices will fail under some specific stress. It is only failure at the lowest levels of stress that may represent inadequacy. Stress on a material, for example, rises with strain until a critical load is exceeded, at which point the material fatigues and loses mechanical integrit...

Clustered architectures which intend to process data within a localized PE are one of the approaches to increase the performance under the difficulties of the wire delay problems. The performance of the clustered architecture depends on the implemented instruction steering scheme. Existing steering schemes insert inter-PE communications to achieve load balance among PEs. These insertions delay ...

The ordinary (OSC) and geosynthetic-encased stone column (ESC) with different bearing strata significantly influenced its behavior. paper established seven models for studying the behavior of floating columns using finite difference method (FDM). effect geogrid length on load-settlement behavior, bulging deformation, failure mode, load transfer coefficient were also analyzed based proposal mode...

Correspondence to: Giedrė Bakšytė, Department of Cardiology, Hospital of Lithuanian University of Health Sciences, Eivenių 2, 50009 Kaunas, Lithuania. E-mail: [email protected] Acute right ventricular (RV) failure is a serious clinical challenge not only in cardiology intensive care but in adult critical care in general. It is related not only to left ventricular failure but also ...