It is known that TiO2 exhibits good photocatalytic properties which could be used in various commercial applications such as water and air purification or photo-induced biodegradation of microbes. TiO2 occurs in nature in the form of three crystal polymorphs: anatase, brookite and rutile. For photocatalytic applications only anatase and rutile are of interest, however anatase shows greater phot...

Polypyrrole–hydroxyethylcellulose/TitaniumDioxide (PPy-HEC/TiO2) nanocomposite was synthesized via in situ chemical oxidative polymerization method at room temperature in water and water/ethyl acetate solution in the presence of ferric chloride (FeCl3). The effect of TiO2 nanoparticles and HEC on the characteristics of products such as thermal stability and morphology was investigated. The fabr...

Titanium dioxide (TiO2) nanotube and its hybrid nanotubes (with various metal oxides such as Ta2O5, Nb2O5, ZrO2, and SiO2) were fabricated by the sol-gel polymerization in the ethanol gels formed by simple L-lysine-based organogelator. The self-assembled nanofibers (gel fibers) formed by the gelator functioned as a template. The different calcination temperatures gave TiO2 nanotubes with variou...

TiO2-coated Ag nanorods (Ag@TiO2 NRs) have been fabricated as multifunctional surface-enhanced Raman scattering (SERS) substrates. Uniform TiO2 shells could sufficiently protect the internal Ag NRs against oxidation and sulfuration, thus the temporal stability of SERS substrates was markedly improved. Meanwhile, due to the synergetic effect between crystalline TiO2 and Ag, the nanocomposites co...

The bio- and hemocompatibility of titanium alloys are due to the formation of a TiO2 layer. This natural oxide may have fissures which are detrimental to its properties. Anodic oxidation is used to obtain thicker films. By means of this technique, at low voltages oxidation, amorphous and low roughness coatings are obtained, while, above a certain voltage, crystalline and porous coatings are obt...

The sole effect of surface/bulk defects of TiO2 samples on their photocatalytic activity was investigated. Nano-sized anatase and rutile TiO2 were prepared by hydrothermal method and their surface/bulk defects were adjusted simply by calcination at different temperatures, i.e. 400-700 °C. High temperature calcinations induced the growth of crystalline sizes and a decrease in the surface areas, ...

We investigated the genotoxic responses to two types of TiO2 nanoparticles (<25 nm anatase: TiO(2)-An, and <100 nm rutile: TiO2-Ru) in human hepatoma HepG2 cells. Under the applied exposure conditions the particles were agglomerated or aggregated with the size of agglomerates and aggregates in the micrometer range, and were not cytotoxic. TiO2-An, but not TiO2-Ru, caused a persistent increase i...

The nanoparticles of Ti and TiO2 have attracted extensive research interest because of their diverse applications in, for instance, catalysis, energy conversion, pigment and cosmetic manufacturing and biomedical engineering. Through this project, a one-step bulk synthesis method of electromagnetic levitational gas condensation (ELGC) was utilized for the synthesis of monodispersed and crystalli...

We present a comparative density functional tight binding study of an organic molecule attachment to TiO2 via a carboxylic group, with the example of acetic acid. For the first time, binding to low-energy surfaces of crystalline anatase (101), rutile (110) and (B)-TiO2 (001), as well as to the surface of amorphous (a-) TiO2 is compared with the same computational setup. On all surfaces, bidenta...

TiO2 nanotube arrays were synthesized by anodization of Ti metal sheets followed by thermal annealing at elevated temperatures from 400 to 600 C. Scanning electron microscopic measurements showed that dense arrays of nanotubes were produced with the inner diameter about 100 nm, wall thickness 35 nm, and length about 10 lm. X-ray diffraction measurements showed that the as-prepared nanotubes wer...